Panasonic PT-DZ16KD User Manual
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 103
[SCHEDULE]
Set the command execution schedule for each day of the week.
Enabling/disabling the schedule function
1) Press as to select [SCHEDULE].
2) Press qw to switch the item.
2) Press qw to switch the item.
f
The items will switch each time you press the button.
[OFF]
Disables the schedule function.
[ON]
Enables the schedule function. Refer to “How to assign a program” (x page 103) or “How to set a
program” (x page 103) for how to set the schedule.
Note
f
When [SCHEDULE] is set to [ON], the [STANDBY MODE] setting is forcibly switched to [NORMAL], and the setting cannot be changed.
Even if [SCHEDULE] is then set to [OFF] when in this state, the setting of [STANDBY MODE] remains at [NORMAL].
How to assign a program
1) Press as to select [SCHEDULE].
2) Press qw to select [ON], and press the <ENTER> button.
2) Press qw to select [ON], and press the <ENTER> button.
f
The
[SCHEDULE] screen is displayed.
3) Select and assign program to each day of week.
f
Press as to select the day of week, and press qw to select a program number.
f
You can set the program from No.1 to No.7. “- - -” indicates that the program number has not been set.
How to set a program
Set up to 16 commands to each program.
1) Press as to select [SCHEDULE].
2) Press qw to select [ON], and press the <ENTER> button.
2) Press qw to select [ON], and press the <ENTER> button.
f
The
[SCHEDULE] screen is displayed.
3) Press as to select [PROGRAM EDIT].
4) Press qw to select a program number, and press the <ENTER> button.
5) Press as to select a command number, and press the <ENTER> button.
4) Press qw to select a program number, and press the <ENTER> button.
5) Press as to select a command number, and press the <ENTER> button.
f
You can change the page using qw.
6) Press asqw to select [TIME], and press the <ENTER> button.
7) Press qw to select “hour” or “minute”, and press as or the number (<0> ‑ <9>) buttons to set a
7) Press qw to select “hour” or “minute”, and press as or the number (<0> ‑ <9>) buttons to set a
time, and then press the <ENTER> button.
8) Press asqw to select [COMMAND].
9) Press the <ENTER> button.
9) Press the <ENTER> button.
f
The
[COMMAND] detailed screen is displayed.
10) Press as to select a [COMMAND].
f
For [COMMAND] which requires detailed settings, the items of the detailed settings will switch each time you press qw.
f
When [INPUT] is selected, press the <ENTER> button, and then press asqw to select the input to be set.
[COMMAND]
Detailed settings of
[COMMAND]
Description
[POWER ON]
―
Switches on the projector.
[STANDBY]
―
Enters standby.
[SHUTTER]
[OPEN]
Opens the shutter.
[CLOSE]
Closes the shutter.