Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-DW730U
  5. User Manual

Panasonic PT-DW730U User Manual

Download
Page of 108
[SIGNAL LIST] menu 
68 - ENGLISH
Settings
Select [SIGNAL LIST] from the main menu. 
Refer to “Navigating through the menu” 
(
 page 41) regarding the operation of the menu 
screen. 
 
■Registered signal status
 
z
The name can be set for each sub memory 
(
 page 69). 
 
z
Memory number: A1 (1-2)
Sub memory number
When the address number (A1, A2, ... H7, 
H8) is registered 
Registering a signal to the list 
After a new signal is input and the <MENU> button 
on the remote control or the control panel is pressed, 
the registration is completed and the 
[MAIN MENU] 
screen is displayed. 
Note
 
z
Up to 96 signals including the sub memories can 
be registered to the projector. 
 
z
There are 12 pages (eight memories of A through 
L, with eight memories possible on each page) for 
memory numbers, and it is registered to the lowest 
number that is available. If there is no available 
memory number it will be overwritten from the 
oldest signal. 
 
z
The registration names are automatically 
determined by the input signals and the memory 
numbers.
 
z
If a menu is being displayed, the new signals will 
be registered at the instant they are input.
Renaming the registered data 
1)  Press ▲▼◀▶ to select the signal to 
display the details. 
2)  Press the <ENTER> button. 
 
z
The 
[REGISTERED SIGNAL STATUS] screen 
is displayed. 
 
z
The name, memory number, input terminal, 
frequency, synchronization signal, etc., of the 
input signal are displayed. 
 
z
Press the <MENU> button to return to the 
[REGISTERED SIGNAL LIST] screen. 
3)  Press the <ENTER> button. 
 
z
The 
[RENAME] screen is displayed. 
4)  Press ▲▼◀▶ to select a character to 
input and press the <ENTER> button 
to enter the character. 
5)  After changing the name, press 
▲▼◀▶ to select [OK], and press the 
<ENTER> button. 
 
z
The registration is completed and it will return to 
the 
[REGISTERED SIGNAL STATUS] screen. 
 
z
If you press ▲▼◀▶ to select [CANCEL] and 
press the <ENTER> button, the changed signal 
name will not be registered and keep the signal 
name that was automatically registered.
Deleting a registered data 
1)  Press ▲▼◀▶ to select the signal to 
delete. 
2)  Press the <DEFAULT> button. 
 
z
The 
[ENTRY SIGNAL CLEAR] screen is 
displayed. 
 
z
To cancel the deletion, press the <MENU> 
button to return to the 
[REGISTERED SIGNAL 
LIST] screen. 
3)  Press the <ENTER> button. 
 
z
The selected signal will be deleted. 
[SIGNAL LIST] menu