ONKYO 29344937 User Manual

14

For detailed information, see the pages in parentheses.

■ Front

■ Rear

a STANDBY/ON indicator

With the Auto Standby function, the SKW-770 
automatically turns on when an input signal is 
detected in Standby mode. When there’s no input 
signal for a while, the SKW-770 automatically 
enters Standby mode.

b POWER switch (Asian models)

Press this switch to the ON position to turn on the 
power. Press it to the OFF position to turn off the 
power.

c OUTPUT LEVEL control (49)

This control is used to adjust the volume of the 
subwoofer.

d LINE INPUT (20)

This RCA input should be connected to the 
subwoofer pre out on the AV receiver with supplied 
RCA cable.

Note:
The Auto Standby function turns the subwoofer on when 
the input signal exceeds a certain level. If the Auto 
Standby function does not work reliably, try slightly 
increasing or decreasing the subwoofer output level on 
the AV receiver (page 70).

a

d

c

b

To AC outlet

Asian models

Red:

Subwoofer in standby mode

Blue:

Subwoofer on