ONKYO 29344937 User Manual

57

With the UP-A1 series Dock, you can easily play the 
music, photo, or movie stored on your Apple iPod or 
iPhone through the AV receiver and enjoy great sound. 
You can use the AV receiver’s remote controller to 
operate your iPod or iPhone.

■ Made for:
• All iPhone models
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPod classic
• iPod (5th generation)
• iPod (4th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• iPod nano (1st generation)
• iPod mini

Note:
Before using the UP-A1 series Dock, update your iPod 
or iPhone with the latest software, available from the 
Apple Web site.

■ Adjusting the Adapter
The adapter needs to be adjusted to match your 
particular iPod or iPhone. If there’s a gap between the 
back of your iPod or iPhone and the adapter, turn the 
adapter counterclockwise to close the gap. Turning the 
adapter counterclockwise moves it forward. Turning it 
clockwise moves it backward.

Notes:
• Make sure that the output level of the AV receiver is 

set to minimum.

• To prevent damage to the dock connector, don’t twist 

your iPod or iPhone when inserting or removing it, 
and be careful not to knock over the dock while your 
iPod or iPhone is inserted.

• Do not take off your iPod or iPhone from the Dock 

when you play back the music, photo, or movie stored 
on your iPod or iPhone.

• Don’t use the UP-A1 with any other iPod or iPhone 

accessories, such as FM transmitters and 
microphones, because they may cause a malfunction.

• It is recommended that you update your iPod or 

iPhone software before using it with this unit. The 
updater for the iPod or iPhone software is available at 
the Apple website.

■ Basic Operation
Note:
The AV receiver may take several seconds to startup, so 
you might not hear the first few seconds of the first song.

If you start iPod or iPhone playback while the AV 
receiver is on Standby, the AV receiver will 
automatically turn on and select your iPod or iPhone 
as the input source. Then, your iPod or iPhone will 
start playback.

If you start iPod or iPhone playback while listening 
to another input source, the AV receiver will 
automatically select your iPod or iPhone as the input 
source.

You can use the AV receiver’s remote controller to 
control basic iPod or iPhone functions.

For the latest information on the Dock, see the Onkyo 
Web site at: www.onkyo.com

Backward

Forward