ONKYO 29344937 User Manual
77
This section explains the items on the “Miscellaneous”
menu.
menu.
Note:
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
Volume Setup
■ MaxVolume
With this setting, you can limit the maximum volume.
The Maximum Volume range is “Off”, 79 to 30.
With this setting, you can limit the maximum volume.
The Maximum Volume range is “Off”, 79 to 30.
■ POnVol
With this preference, you can specify the volume setting
to be used each time the AV receiver is turned on.
The range is “Last”, “Min”, 1 to 79 or “Max”.
To use the same volume level that was used when the AV
receiver was turned off, select “Last”.
The “POnVol” cannot be set higher than the “Max
Volume” setting.
With this preference, you can specify the volume setting
to be used each time the AV receiver is turned on.
The range is “Last”, “Min”, 1 to 79 or “Max”.
To use the same volume level that was used when the AV
receiver was turned off, select “Last”.
The “POnVol” cannot be set higher than the “Max
Volume” setting.
■ HP Level
With this preference, you can specify the headphone
volume relative to the main volume. This is useful if
there’s a volume difference between your speakers and
your headphones. The headphones level can be set from
–12 dB to +12 dB.
With this preference, you can specify the headphone
volume relative to the main volume. This is useful if
there’s a volume difference between your speakers and
your headphones. The headphones level can be set from
–12 dB to +12 dB.
Miscellaneous (Volume) Setup
1
Press the [RECEIVER] button followed by
the [SETUP] button.
the [SETUP] button.
2
Use the Up and Down [
q]/[w] buttons to
select “6. Miscellaneous”, and then press
[ENTER].
[ENTER].
3
Press the [ENTER] button.
4
Use the Up and Down [
q]/[w] buttons to
select an item, and use the Left and Right
[
[
e]/[r] buttons to change it.
The items are explained below.
5
When you’ve finished, press the [SETUP]
button.
Setup closes.
button.
Setup closes.