Panasonic PT-DW17KU User Manual

▶

z

Gently push in the lamp case along the grooves for the lamp case attachment guide on the projector, and 

then firmly tighten the lamp case fixing screws (two screws).

▶

z

When you secure the lamp case with the projector installed upward in the vertical direction, the lamp case 

may drop off on its weight. Be sure to hold the lamp case handle when you tighten the lamp case fixing 

screws.

▶

z

If the lamp case is not installed properly, remove it and then gently install it again. Pushing it in forcibly or 

exerting excessive force may break the connector.

▶

z

Make sure to attach the lamp case properly.

Grooves of the guide to attach the lamp case

Guides to attach the lamp case

Lamp case handles

Lamp case L

Lamp case R

Lamp case fixing screws

(i)  Align the lamp unit cover to the marks of (a) and (b) (  and  ) to attach as shown by the arrow.

(ii) Close the lamp unit cover in the direction of the arrow and use a Phillips screw driver to firmly tighten 

the lamp unit cover fixing screw (one screw).

▶

z

Make sure to attach the lamp unit cover properly.

 

z

When you place the new lamp unit, the projector resets the total usage time of the lamp unit automatically.

 

z

When the lamp case is removed or attached, it will be caught because of the fall-prevention stopper. This, 

however, is not a problem.