Panasonic SC-BT07 User Manual

RQT9483

≥The following sound effects/modes may not be available or have no effect with some sources, or when headphones are used (> 19).

≥You may experience a reduction in sound quality when these sound effects/modes are used with some sources. If this occurs, turn the sound 

effects/modes off.

≥You can also press [SURROUND] and then [3, 4] to select the 

mode.

≥The selected effect will only be displayed on the main unit.

While “MANUAL” is displayed

Press [2, 1] and select the desired effect.

≥“NOT CONDITIONAL” is displayed on the main unit if the setting is 

not active.

≥“DOLBY PL II MOVIE” and “DOLBY PL II MUSIC” do not work when 

audio is output from the HDMI AV OUT terminal.

1 Press [SOUND] several times to select the mode.

≥You can also press [SOUND] and then [3, 4] to select the 

mode.

≥The selected effect will only be displayed on the main unit.

2

While the selected mode is displayed

Press [2, 1] and select the desired setting.

1 Press and hold [-CH SELECT] for 3 seconds to 

2 Press [-CH SELECT] several times to select the 

Each time you press the button:

L R

—) C_) RS_) LS_) SW

^"""""""""""""""""""b

L R:

Front speaker (left and right)

C:

Center speaker

RS:

Surround speaker (right)

LS:

Surround speaker (left)

SW:

Subwoofer

≥The channels not included in the playing audio will not be 

displayed (subwoofer is displayed even if it is not included).

(When “L R” selected)

3 Press [

2, 1] to adjust the balance of the front 

(When other speakers are selected)

4 Press [

3] (increase) or [4] (decrease) to adjust 

s6 dB to r6 dB

STANDARD: Sound is output as it was recorded/encoded.

Speaker output varies depending on the source.

You can enjoy sound from the front speakers, as well 
as the surround speakers even when playing a 
2-channel sound or non-surround sound.

Suitable for movie software, or the one recorded in 

Dolby Surround. (except [DivX])

Adds 5.1-channel effects to stereo sources. 

(except [DivX])

You can enjoy sound from all speakers with stereo 

sources.

You can play any source in stereo. Sound will be 

output to the front speakers and the subwoofer 

only.

OK

SOUND

SURROUND

-CH SELECT

You can select sound quality settings.
– FLAT(Flat):

Cancel (no effect is added).

– HEAVY(Heavy): Adds punch to rock.

– CLEAR(Clear): Clarifies higher sounds.

– SOFT(Soft):

For background music.

This unit will change the settings for the amount of 
bass depending on the source.
However you can also adjust the amount of bass for 
the source being played.
– 1 (Weakest effect)

– 4 (Strongest effect)
≥The setting you make is retained, and recalled 

every time you play the same type of source.

(Effective when playing audio containing center 
channel sound.)
You can make the sound of the center speaker seem 
like it is coming from within the TV.
– ON

(Effective when playing video with 5.1ch audio.)
You can enhance the surround effect for low volume 
5.1-channel sound.
(Convenient for late night viewing.)
– ON

SCBT207GN-RQT9483-L.book  18 ページ  ２００９年５月２５日　月曜日　午後９時３６分