Runco LS-10D User Manual

Runco LS-10d Installation/Operation Manual

PRE

IMINAR

2.1
LS-10d at a Glance

Figure 2-1 and Figure 2-2 show the key LS-10d components.

Figure 2-1. LS-10d Front/Side View

• STATUS LED

Indicates projector status as follows:

• Solid green = AC power present, ready to turn on (lamp not lit)

• Flashing green = lamp is warming up or cooling down; keypad functions not allowed

• Off = Lamp lit, projector functioning normally

• Alternating green/red = Lamp problem (door open, unable to strike, end of life), user

intervention likely to fix problem

• Flashing red = Over temperature, user intervention (clear vents, turn on AC) may fix

problem

• Solid red = Error that requires servicing (fan fail, Power-on self-test fail etc.)

• SYSTEM KEYPAD

Not used in this version of the product. Use the DHD Controller to configure and
control the projector.

• EXHAUST VENT

Warm air exits the projector through this vent. Ensure that it is not blocked.

• INTAKE VENT

Internal fans draw cool air into the projector through this vent.

2. Controls and Functions

System Keypad

Exhaust
Vent

Intake

Vent

Status LED

Projection Lens