Runco LS-5 User Manual
Runco LS-3/LS-5 Installation/Operation Manual
1
PRE
L
IMINAR
1.1
About This Manual
About This Manual
This Owner’s Manual describes how to install, set up and operate the Runco LS-3/LS-5
Digital Light Processing (DLP™) Projector.
Digital Light Processing (DLP™) Projector.
Throughout this manual, the Runco LightStyle™ Series LS-3/LS-5 Home Theater
Projector is referred to as the “LS-3/LS-5.”
Projector is referred to as the “LS-3/LS-5.”
Target Audience
Runco has prepared this manual to help home theater installers and end users get the
most out of the LS-3/LS-5.
most out of the LS-3/LS-5.
If You Have Comments
About This Manual...
About This Manual...
Runco welcomes your comments about this manual. Send them to info@Runco.com.
Textual and Graphic
Conventions
Conventions
Text Conventions: The following conventions are used in this manual, in order to clarify
the information and instructions provided:
the information and instructions provided:
• Remote and built-in keypad button identifiers are set in upper-case bold type; for
example, “Press EXIT to return to the previous menu.”
• Computer input (commands you type) and output (responses that appear on-screen) is
shown in monospace (fixed-width) type; for example: “To change the aspect ratio to
Letterbox, type
Letterbox, type
op aspect = 1 <Enter>. ”
• All keys with functional names are initial-capped, set in bold type and enclosed in angle
brackets. These keys are the following:
<Enter>, <Spacebar>, <Control>,
<Esc> and <Tab>.
•
<Enter> indicates that you may press either the RETURN or ENTER key on your
keyboard if it has both keys.
keyboard if it has both keys.
In addition to these conventions, underlining, boldface and/or italics are occasionally used
to highlight important information, as in this example:
to highlight important information, as in this example:
1. Introduction
A carriage return must be used after each command or string.
Note