Philips MCB395 Quick Setup Guide
4
3
Setting the clock
1
2
5
In the standby mode, press and hold
CLOCK
on the remote control.
➜
The clock digits for the hours continue to flash.
Adjust
VOLUME -/+
(or press
VOL +/-
on the remote control) to set the hours.
Press
CLOCK
to confirm.
➜
The minute digits start flashing.
Adjust
VOLUME -/+
(or press
VOL +/-
on the remote control) to set the minutes.
Press
CLOCK
to confirm the time.
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players
(USB 2.0 or USB1.1)
,
memory cards (requires an additional card reader to
work with this Hi-Fi system).
1
2
3
Insert the USB device’s USB plug into the socket
on the set.
Press
SOURCE
once or more (or
USB
on the remote control) to select
USB
.
Play the USB’s audio files as you do with the albums/tracks on a CD.
Enjoy
C
Playing a disc
1
2
3
Press
OPEN/CLOSE
ç
to open the disc tray and load in a disc, then press the same
button again to close the disc tray.
➜
Make sure the label side of the disc is facing up.
Press
ÉÅ
to start playback.
To stop playback, press
9
.
Do not put in
direct sunlight or a p
rolon
ge
d
pe
rio
d
Notes for remote control:
– First select the source you wish to control by pressing one of the source select
keys on the remote control (for example FM, DISC).
– Then select the desired function (for example
– First select the source you wish to control by pressing one of the source select
keys on the remote control (for example FM, DISC).
– Then select the desired function (for example
É, S , T).
IMPORTANT!
– To set clock in the Eco Power mode, press and hold ECO POWER/STANDBY-ON
– To set clock in the Eco Power mode, press and hold ECO POWER/STANDBY-ON
2 on the set for 3
seconds or more to switch to normal standby mode first before proceeding with the procedures below.
iPod playback via the USB
port cannot be guaranteed.
port cannot be guaranteed.
MCB395 QSG_05-Eng
2008.5.23, 13:35
3