Pioneer S-DV700SW User Manual

 

   

Always check that selector are set properly 
before plugging the power cord into the wall 
outlet.
1. Disconnect the power cord.
2. Use a small-sized screwdriver.
3. Insert the screwdriver into the groove on 

the voltage selector, and adjust the 
VOLTAGE SELECTOR.

Power source voltage is factory adjusted at 
240 volts. If your area is different, change 
the voltage selector’s setting.        

On the inside cover of the unit.

•  Remember that the speaker system is heavy 

and that its weight could cause the wood 
screws to work loose, or the wall material to 
fail to support it, resulting in the speaker 
falling. Make sure that the wall you intend to 
mount the speakers on is strong enough to 
support them. Do not mount on plywood or 
soft surface walls.

•  Mounting screws are not supplied. Use 

screws that are suitable for the wall  material 
and that will  support the weight of the 
speaker.

•  If you are unsure of the qualities and 

strength of the walls, consult a professional 
for advice.

•  Pioneer is not responsible for any accidents 

or damage that result from improper 
installation.

Wood screw

Protrusion: 5-7mm

5 mm

5 mm

10 mm

NS03_ZFL.book 3 ページ ２００３年７月３１日　木曜日　午後７時０分