Planar pd 370 User Manual

 

 

10

 

 

• Before connecting, turn off the monitor and any connected source equipment. After making all 
connections, turn on the monitor first before turning on other devices. 
When connecting a computer, be sure that the computer is the last device turned on, after all 
connections are made. 
• Read the operation manuals of the video source equipment before making connections. 

 
Unpacking 
‹

  PD370/PD420/PD470/PD520 is packed inside a boxed carton. In order to protect the monitor 

during transportation, additional packing material has been placed within the carton.   

‹

  Before unpacking your monitor, prepare a stable, level, and clean surface near a wall outlet for 

your monitor.   

‹

  Set the monitor box in an upright position and open from the top of the box before removing 

the top packaging material.   

 

‹

  High Definition Multimedia Interface (HDMI) 

‹

  Component (YPbPr) 

‹

  Composite Video 

‹

  S-Video 

‹

  HD-15 for VGA 

‹

  SCART (using Component 1 and Video 1) 

 

Plug the supplied power cord into the AC socket on the rear of the monitor. 

 
Connecting to Video Equipment 

 

Use a HDMI cable when connecting to video sources that utilize HDMI output. 

 

Use a component cable when connecting to video sources that utilize component interfaces for 
video connection.

 

 

Using a S-video or a composite video cable to connect to video sources that utilize s-video or 
composite interfaces for video 

 

Connect the monitor to the computer using an HD 15-pin VGA cable. Secure the cable connectors 
by tightening the screws on both sides of the plug.