Sony LF-B1 User Manual

42

You do not normally need to perform the device 
registration procedure described below because 
registration can be performed easily from 
LocationFree Player (

1 page 17). Perform the 

following procedure if you need to enter the 
registration password when you establish a 
connection. 

You can register or delete another computer with 
LocationFree Player installed on the Base 
Station.
You can register up to eight computers with 
LocationFree Player installed.

z 

Before starting the registration

 

1 page 11), 

configure the device you are registering so that it is 
able to connect with the Base Station.

It is not possible to watch video on more than one of 
the registered LocationFree devices at the same time. 
(At any one time, only one of the devices may view 
video.) 

1

To enable device registration, select [Enable]. 

2

The Base Station’s current registration 
processing status appear here.

3

The password needed to register a device with 
the Base Station appears here.
You will need this password when you make 
device registration settings on the device side, 
so make a note of it.

4

When you click this button, the Base Station 
confirms the state (Enable/Disable) selected 
for [Register Devices].

5

A list of the devices currently registered with 
the Base Station appears here.

6

If you want to stop connecting to the Base 
Station from a registered device, check the 
device in the “List of Registered Devices” list 
and click the [Delete] button.

Select [Enable] under [Register Devices].

Click [Set]. 

z 

• The registration password changes with every 

registration. If you cancel a registration, and then 
start another registration, the registration password 
changes to a new password.

• To check whether device registration is complete, 

click [Update] under [List of Registered Devices]. 

• After configuring the Base Station to accept 

registration, you need to register your device on the 
Base Station (