Sony HT-SS2000 User Manual

GB

D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HT-
SF2000-CEL.fm

[HT-SF2000/HT-SS2000]

3-210-806-11

(1)

You can use the TUNER menu to set the FM 
station receiving mode.
Select “4-TUNER” in the amplifier menus. 
For details on adjusting the parameters, see 
“Navigating through menus” (page 34) and 
“Overview of the menus” (page 35).

x FM MODE (FM station receiving 

• FM AUTO

This receiver will decode the signal as stereo 
signal when the radio station is broadcast in 
stereo.

• FM MONO

This receiver will decode the signal as mono 
signal regardless of the broadcast signal.

You can use the AUDIO menu to make 
settings for the audio to suit your preference.
Select “5-AUDIO” in the amplifier menus. For 
details on adjusting the parameters, see 
“Navigating through menus” (page 34) and 
“Overview of the menus” (page 35).

x DEC. PRI. (Digital audio input 

Lets you specify the input mode for the digital 
signal input to the DIGITAL IN and HDMI IN 
jacks.
• DEC. AUTO

Automatically switches the input mode 

between DTS, Dolby Digital, or PCM.

• DEC.  PCM

PCM signals are given priority (to prevent 

interruption when playback starts). 

However, when other signals are input, there 

may be no sound depending on the format. 

In this case, set to “DEC. AUTO”.  

When signals from the HDMI IN jack are 

selected, only PCM signals are output from 

the connected player. When signals in other 

format are received, set to “DEC. AUTO”.

When set to “DEC. AUTO” and the sound from the 
digital audio jacks (for CD, etc.) is interrupted when 
playback starts, set to “DEC. PCM”.