Sony HT-SL5 User Manual

GB

1 ;

 Lights up when the receiver is

decoding signals recorded in the Dolby
Digital format.

2 ;

 “PRO LOGIC” lights up

when a 2-channel signal is applied with
“DOLBY PL” or C.ST.EX A–C. “PRO
LOGIC II” lights up when a 2-channel signal
is set to “II MOVIE” or “II MUSIC”.

However, this indicator does not light if the
center and surround speakers are set to “NO”,
and “AUTO DEC” or “NORM. SURR.” is
selected.

3

 Lights up when DTS signals are input.

4

 Lights up when MPEG signals are

input.

Only the front 2 channels are compatible with
MPEG format. Multi channel surround sound is
downmixed and output from the front 2 channels.

5

 Light up when using the

receiver to tune in radio stations, etc. See
pages 23–24 for tuner operations.

6

 Lights up when sleep timer is

activated.

7

 Lights up when dynamic range

compression is activated. See page 22 to
adjust the dynamic range compression.

8

 Lights up when the source signal is a

digital signal being input through the COAX
terminal.

9

 Lights up when the source signal is a

digital signal being input through the
OPTICAL terminal.

0

 Lights up when the disc being played

back contains the LFE (Low Frequency
Effect) channel and when the sound of the
LFE channel signal is actually being
reproduced.

qa

 The letters

light up to indicate the channels being played
back.
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing)), SW (Sub woofer)

The boxes around the letters light up to
indicate the speakers used to playback the
channels.

a

a

0

1

2

3

4

5

7

8

6

9

qa