Sony MHC-RX90 User Manual
7
5
Press ENTER/NEXT.
The clock starts working.
Tips
• If you’ve made a mistake, start over from step 1.
• Setting the time deactivates the demo mode.
• Setting the time deactivates the demo mode.
If you want to display the demo mode, press
DISPLAY/DEMO when the power is off.
DISPLAY/DEMO when the power is off.
Note
When setting the time, set the equalizer display to
anything other than Spectrum analyzer pattern 3
(see “To change the equalizer display” on page 31).
anything other than Spectrum analyzer pattern 3
(see “To change the equalizer display” on page 31).
3,5 6
2 4
1
Æ‚
⁄
„
0
)
POWER
continued
n
n
Step 3: Presetting
radio stations
radio stations
The 3 band model lets you preset up to 40
stations, 20 for FM, 10 for MW and 10 for LW.
stations, 20 for FM, 10 for MW and 10 for LW.
The 4 band model lets you preset up to 45
stations, 20 for FM, 10 for MW, 10 for LW and
5 for UKV.
stations, 20 for FM, 10 for MW, 10 for LW and
5 for UKV.
1
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
until the band you want appears in
the display.
The bands you can receive vary
depending on the model you purchased.
Be sure to check which bands you can
receive.
Every time you press this button, the
band changes as follows:
3 band model:
FM
depending on the model you purchased.
Be sure to check which bands you can
receive.
Every time you press this button, the
band changes as follows:
3 band model:
FM
n
MW
n
LW
4 band model:
FM
FM
n
MW
n
LW
n
UKV*
* “STEREO PLUS” is displayed when
you select UKV.