Sony HTDDW670 User Manual

masterpage:Left

lename[E:\SEM_Janet\Revision_DDW670\J904000_2342216121DDW670_GB\2342216121\G

B03CON_HT-DDW670-U.fm]

 model name1[HT-DDW670]

 [2-342-216-12(1)]

If your receiver has a voltage selector on the rear 
panel, check that the voltage selector is set to the 
local power supply voltage. If not, use a 
screwdriver to set the selector to the correct 
position before connecting the AC power cord to 
a wall outlet.

Connect the AC power cord to a wall outlet.

Before using the receiver for the first time, 
initialize the receiver by performing the 
following procedure.
This procedure can also be used to return 
settings you have made to their factory defaults. 
Use the buttons on the receiver for the operation.

Press ?/1 to turn off the receiver.

Hold down ?/1 for 5 seconds.

“PUSH” and “ENTER” appears in the 
display alternatingly.

“CLEARING” appears in the display for a 
while, then “CLEARED” appears.
The following are reset to their factory 
settings.
• All settings in the SET UP, LEVEL, 

TONE and CUSTOMIZE menus.

• The sound field memorized for each 

input and preset station.

• All sound field parameters.
• All preset stations.
• All index names for inputs and preset 

stations.

• MASTER VOLUME –/+ is set to “VOL 

MIN”.

120V

220V

240V

+

b

To a wall 
outlet

AC power cord

GB01COV_HT-DDW670-U.book  Page 14  Saturday, January 1, 2005  7:54 AM