Sony HT-DDW665 User Manual
Enjo
yin
g
Surr
o
und
Sound
masterpage:Right
lename[E:\SEM_Janet\J9040000_4252086821DDW665US\4252086821\GB05SND_HT-
DDW665-US.fm]
17
US
model name1[HT-DDW665]
[4-252-086-82(1)]
In this mode, the receiver outputs the sound
from the front left/right speakers and sub woofer
only.
When multi channel surround formats are input,
the signals are downmixed to 2 channel with
bass frequencies being output from the sub
woofer.
When standard 2 channel stereo sources are
input, the receiver’s bass redirection circuitry
will be activated. The front channel bass
frequencies will be output from the sub woofer.
from the front left/right speakers and sub woofer
only.
When multi channel surround formats are input,
the signals are downmixed to 2 channel with
bass frequencies being output from the sub
woofer.
When standard 2 channel stereo sources are
input, the receiver’s bass redirection circuitry
will be activated. The front channel bass
frequencies will be output from the sub woofer.
Press 2CH.
“2CH ST.” appears in the display and the
receiver switches to the 2CH STEREO mode.
receiver switches to the 2CH STEREO mode.
The Auto Format Direct (A.F.D.) mode allows
you to select the decoding mode you want for
your audio sound.
you to select the decoding mode you want for
your audio sound.
Decoding the input audio
signal automatically
signal automatically
In this mode, the receiver automatically detects
the type of audio signal being input (Dolby
Digital, DTS, standard 2 channel stereo, etc.)
and performs the proper decoding if necessary.
This mode presents the sound as it was recorded/
encoded, without adding any surround effects.
However, if there are no low frequency signals
(Dolby Digital LFE, etc.) it will generate a low
frequency signal for output to the sub woofer.
the type of audio signal being input (Dolby
Digital, DTS, standard 2 channel stereo, etc.)
and performs the proper decoding if necessary.
This mode presents the sound as it was recorded/
encoded, without adding any surround effects.
However, if there are no low frequency signals
(Dolby Digital LFE, etc.) it will generate a low
frequency signal for output to the sub woofer.
Press A.F.D. repeatedly to select “A.F.D.
AUTO”.
AUTO”.
The receiver automatically detects the type of
audio signal being input and performs the proper
decoding if necessary.
audio signal being input and performs the proper
decoding if necessary.
Enjoying Surround Sound
Using only the front
speakers and sub woofer
speakers and sub woofer
— 2CH STEREO
Enjoying higher fidelity
sound
sound
— AUTO FORMAT DIRECT
A.F.D. mode
(Display)
(Display)
Decoding mode
A.F.D. AUTO
(A.F.D. AUTO)
As encoded
PRO LOGIC
(DOLBY PL)
(DOLBY PL)
Dolby Pro Logic
PRO LOGIC II MOVIE
(PLII MOV)
Dolby Pro Logic II
PRO LOGIC II MUSIC
(PLII MUS)
continued
GB01COV_HT-DDW665-US.book Page 17 Monday, April 26, 2004 10:03 AM