Sony MHC-S90D User Manual

MHC-S90D 4-235-983-13(2) GB

Notes

• When you select an item, the sound cuts off for a

moment.

• Depending on the settings of other speakers, the

subwoofer may output excessive sound.

Specifying the rear speaker position

and height

If you select anything other than “NONE” in
“REAR”, specify the position and height of the
rear speakers.

Rear speaker position

• SIDE: Select this if the location of your rear

speakers corresponds to section A.

• MIDDLE: Select this if the location of your

rear speakers corresponds to section B.

• BEHIND: Select this if the location of your rear

speakers corresponds to section C.

Rear speaker height

• LOW: Select this if the location of your rear

speakers corresponds to section A.

• HIGH: Select this if the location of your rear

speakers corresponds to section B.

Speaker settings

— SPEAKER SETUP

Set up your speaker system for playback of
5.1CH DVDs.

To return to the default setting

Select the item, then press CLEAR.

x SIZE

When you do not connect center, rear speakers
or sub woofer, or move the rear speakers, set
the parameters for CENTER, REAR and
SUBWOOFER. Since the front speaker setting
is fixed, you cannot change them.

FRONT

• YES

CENTER

• YES: Normally select this.

• NONE: Select this when a center speaker is not

used.

REAR

•

BEHIND (LOW), BEHIND (HIGH), MIDDLE
(LOW), MIDDLE (HIGH), SIDE (LOW),
SIDE (HIGH): Specify the position and height
to implement the Digital Cinema Surround
modes in the “Virtual Multi Dimension” sound
field (page 49) properly.

• NONE: Select this when rear speakers are not

used.

SUBWOOFER

• YES: Select this when a subwoofer is used.

• NONE: Select this when a subwoofer is not

used.

Select “SPEAKER SETUP” in the Setup Display.

SPEAKER SETUP

DISTANCE:

SIZE:

BALANCE:
LEVEL:

OFF

TEST TONE:

FRONT:
CENTER:

YES

BEHIND(LOW)

YES

REAR:
SUBWOOFER: