Sony HM-982RW User Manual
Playback of CD
23
Knowledge section
Preparation section
Application section
Basic section
Muting the sound temporarily (MUTE)
÷ Press again to resume the original volume.
÷ This is also cancelled when the volume is adjusted.
Bass and treble compensation
(N.B.: Natural Bass circuit)
(N.B.: Natural Bass circuit)
Blinks
Lights
2 Adjust the volume with the VOLUME keys.
÷ Headphones with a stereo mini plug can be connected.
÷ The sounds from all speakers are cut off.
Listening through headphones
1 Insert the headphone plug into the PHONES jack.
PHONES
Balance adjustment (Bal.)
Tone adjustment (TONE)
MUTE
\
\
The balance of volumes from the left and right speak-
ers can be adjusted as follows.
ers can be adjusted as follows.
Blinks
1 Press the TONE key to select ”Bass”.
Adjust the level using the VOLUME keys.
2 Press the TONE key again while “Bass” is
displayed to select “Mid”. Adjust the level
using the VOLUME keys.
using the VOLUME keys.
÷ The Bass, Mid and Treble can be adjusted independ-
ently in the range from –4 to +4.
1 Press the MENU key.
2 Press the MULTI CONTROL keys to select
“Bal. ?” (Balance), then press the SET key.
3 Adjust the left and right speaker balance by press-
ing the MULTI CONTROL keys.
4 Press the SET key.
4 Press the TONE key once more.
Remote control unit only
Remote control unit only
3 Press the TONE key again while “Mid” is
displayed to select “Treble”. Adjust the
level using the VOLUME keys.
level using the VOLUME keys.
Hearing sound
MUTE
TONE
VOLUME
DOWN
UP
B a s s
0
SOUND
B a l .
?
B a l .
C e n t e r
C e n t e r
N.B.1
#
#
MULTI
CONTROL
#
#
MULTI
CONTROL
SET
After this adjustment, the N.B. effect will be dis-
abled.
abled.
MENU
Remote control unit only
Each press switch the modes as follows.
“S.DIRECT” ...... The source signal from a CD or
TAPE can be reproduced with high
fidelity to the original sound by
bypassing the tone control cir-
cuitry in the main unit.
fidelity to the original sound by
bypassing the tone control cir-
cuitry in the main unit.
Goes off ........... The source signal is processed by
the tone control circuitry before
being output from the main unit.
being output from the main unit.
“N.B.1” ............. The lowest and highest frequen-
cies are enhanced according to
the current volume level.
the current volume level.
“N.B.2” ............. Only the lowest frequencies are
enhanced.
The low frequencies (Bass), medium frequencies
(Mid) and high frequencies (Treble) can be adjusted
separately.
(Mid) and high frequencies (Treble) can be adjusted
separately.
÷ This adjustment is not available while "S.DIRECT" is
selected. "X" is displayed to indicate this.
"Display in menu mode (Display "X")"
)
÷ Press the
%
%
%
%
%
(up) key to shift the balance toward the Right
channel or press the
fi
fi
fi
fi
fi (down) key to shift it toward the
Left channel. "Center" is displayed when the balance is
set to the center.
set to the center.