Sony HM-982RW User Manual
Recording on TAPE
45
Knowledge section
Preparation section
Application section
Basic section
1 Adjust the automatic blank detection level using
the MULTI CONTROL keys.
Setting the automatic blank detection level (Cut Lv.)
2 Complete the setting mode.
÷ The blank detection level can be adjusted in the range from
-2 to +2.
+ ...... Increases the blank detection level.
– ...... Decreases the blank detection level.
– ...... Decreases the blank detection level.
#
#
MULTI
CONTROL
SET
3
The automatic blank detection level during analog-to-digital recording can be set by the user. If you do not
want to adjust it, simply press the SET key.
Even when the track number setting mode (T.Mark) is set to "Auto", the track numbers may not be
incremented if the level of blanks in the recording source are high. In this case, increase the blank detection
level.
On the contrary, if track numbers are incremented on other points than blanks, decrease the blank detection
level.
want to adjust it, simply press the SET key.
Even when the track number setting mode (T.Mark) is set to "Auto", the track numbers may not be
incremented if the level of blanks in the recording source are high. In this case, increase the blank detection
level.
On the contrary, if track numbers are incremented on other points than blanks, decrease the blank detection
level.
Changing the recording input setting
C u t
L v . - 2
L v . - 2
÷ Even when the blank detection level is adjusted, there may
be cases in which track number marking are not improved.