Sony DAVHDZ273 User Manual
Dis
c
29
US
Playing a Disc
Depending on the DVD VIDEO or VIDEO CD,
some operations may be different or restricted.
Refer to the operating instructions supplied with
your disc.
some operations may be different or restricted.
Refer to the operating instructions supplied with
your disc.
1
Turn on your TV.
2
Switch the input selector on the TV to
this system.
this system.
3
Press "/1.
The system turns on.
Unless the system is set to “DVD,” press
FUNCTION +/– to select “DVD.”
Unless the system is set to “DVD,” press
FUNCTION +/– to select “DVD.”
4
Press A.
5
Load a disc.
Place one disc on the tray, and then press A.
Note
• When you play an 8 cm disc, place it on the
inner circle of the tray. Be careful that the disc is
not skewed on the inner circle of the tray.
not skewed on the inner circle of the tray.
• Do not forcibly press the disc tray closed with
your finger, as this may cause malfunction.
• Do not place more than one disc on the tray.
6
Press H.
The system starts playback (continuous
play).
play).
7
Adjust the volume by using VOLUME +/
– on the remote or the VOLUME control
on the unit.
– on the remote or the VOLUME control
on the unit.
The volume level appears on the TV screen
and in the front panel display.
and in the front panel display.
Note
• Depending on the system status, the volume level
may not appear on the TV screen.
• When you set the Control for HDMI function to on,
the TV that is connected to the system with an HDMI
cable (not supplied) can be sync-operated with the
system. For details, see “Using the Control for HDMI
Function for “BRAVIA” Sync” (page 56).
cable (not supplied) can be sync-operated with the
system. For details, see “Using the Control for HDMI
Function for “BRAVIA” Sync” (page 56).
To turn the system off
Press "/1 while the system is on. The system
enters standby mode.
enters standby mode.
To save power in standby mode
Press "/1 while the system is on.
To enter power saving mode, make sure that the
system is in the following status.
To enter power saving mode, make sure that the
system is in the following status.
– “DEMO” is set to “OFF” (page 20).
– [CONTROL FOR HDMI] is set to [OFF]
To use the headphones
Connect the headphones to PHONES jack on the
unit. The sound of the system is muted.
unit. The sound of the system is muted.
Disc
"/1
Disc tray
FUNCTION
Adjust the volume
Connect
headphones
headphones
H
A
"/1
FUNCTION
+/–
+/–
x
H
X
./>
MUTING
VOLUME +/–
/m/
M/
STEP
/
,
/