Sony DAV-HDX276 User Manual

C/c to select the next operation.

x To finish pairing

Select [NO], then press 

.

x To perform pairing of another S-AIR 
sub unit

Select [YES], then press 

.

• If you perform the pairing operation between the unit 

and another S-AIR sub unit (page 80), sound 
transmission established by ID is canceled.

• When you perform pairing, [(PAIRING)] appears 

beside ID on the display for selecting ID.

Perform the ID setting of the unit according to 
the procedure of “To set the ID of the unit.” If 
you select a new ID (you can select the same ID 
as before), pairing is canceled.

If you use multiple wireless systems which 
sharing the 2.4 GHz band, such as wireless LAN 
or Bluetooth, the transmission of S-AIR 
products or other wireless systems may be 
unstable. In this case, the transmission may be 
improved by changing the following “RF 
CHANGE” setting.

X/x repeatedly until “RF 

c.

X/x to select the desired setting.

• “AUTO”: Normally select this. The 

system change “RF CHANGE” to “ON” 
or “OFF” automatically.

• “ON”: The system transmits sound by 

searching the better channel for 
transmitting.

• “OFF”: The system transmits sound by 

fixing the channel for transmitting.

The setting is made.

The system menu turns off.

• When the wireless transmitter is not inserted in the 

unit, you cannot set “RF CHANGE.”

• In most cases, you will not need to change this 

setting.

• If “RF CHANGE” is set to “OFF,” transmission 

between the unit and S-AIR sub unit can be 
performed using one of the following channels.

– S-AIR ID A: equivalent channel for Wi-Fi 

channel 1

– S-AIR ID B: equivalent channel for Wi-Fi 

channel 6

– S-AIR ID C: equivalent channel for Wi-Fi 

channel 11

• The transmission may be improved by changing the 

transmission channel (frequency) of the other 
wireless system(s). For details, refer to the operating 
instructions of the other wireless system(s).