Sony DAVLF1H User Manual
13
US
Ge
tting
tting
Star
te
d –
B
A
A
SIC –
Assembling the speakers
Attach the stands and connect the speaker cords to the center speaker, front speakers, and surround
speakers.
speakers.
About connecting speaker cord
The connector and color tube of the speaker cords are the same color as the label of the speaker to be
connected.
connected.
To avoid short-circuiting the speakers
Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these
precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch
another speaker terminal or the bare wire of another speaker cord, such as shown below.
precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch
another speaker terminal or the bare wire of another speaker cord, such as shown below.
Note
• Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3, and # to #. If the cords
are reversed, the sound will lack bass and may be distorted.
To assemble the center speaker
Use the parts illustrated below.
Tip
• You can install the center speaker on a wall using an optional kit (not supplied).
Center speaker (1)
Adjuster (1)
Center speaker
base (1)
Speaker cord
(green) (1)
Screws
(silver, large) (2)
Label on the rear of the
speaker: Green
Color tube
(–)
(+)
Gray
Black
Do not catch the
speaker cord insulation
in the SPEAKER jack.
speaker cord insulation
in the SPEAKER jack.
Stripped speaker cord is
touching another speaker
terminal.
touching another speaker
terminal.
Stripped cords are touching each
other due to excessive removal of
insulation.
other due to excessive removal of
insulation.
continued