Sony DAV-LF10 User Manual
Ad
dit
iona
dit
iona
l Inf
o
rma
tion
101
GB
The language for the sound track cannot be
changed.
changed.
• Multilingual tracks are not recorded on the DVD
being played.
• The DVD prohibits changing the language for the
sound track.
The subtitle language cannot be changed.
• Multilingual subtitles are not recorded on the
DVD being played.
• The DVD prohibits changing the subtitles.
The subtitle cannot be turned off.
• The DVD prohibits turning off subtitles.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD being
played (page 70).
• The DVD prohibits changing the angles.
A disc cannot be ejected and “Locked”
appears in the front panel display.
appears in the front panel display.
• Contact your Sony dealer or local authorized Sony
service facility.
“Cannot Lock” appears in the front panel
display.
display.
• Turn the power off and then on again by pressing
[/1 on the system, then perform “On moving the
system” (page 4). If “Cannot Lock” still appears
in the front panel display, contact your Sony
dealer or local authorized Sony service facility.
system” (page 4). If “Cannot Lock” still appears
in the front panel display, contact your Sony
dealer or local authorized Sony service facility.
“Copyright lock” appears when playing a
DVD-RW disc.
DVD-RW disc.
• Images taken from digital broadcasts, etc., may
contain copy protection signals, such as complete
copy protection signals and single copy signals.
When images that contain copy protection signals
are played, playback may jump to the next
chapter.
copy protection signals and single copy signals.
When images that contain copy protection signals
are played, playback may jump to the next
chapter.
The system does not work normally.
• Disconnect the AC power cord (mains lead) from
the wall outlet (mains), then reconnect after
several minutes.
several minutes.
The Touch Panel Sensor does not work
normally.
normally.
• Disconnect the AC power cord (mains lead) from
the wall outlet (mains), then reconnect after
several minutes and allow the control unit to
initialize (page 29).
several minutes and allow the control unit to
initialize (page 29).
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION:
TOTAL HARMONIC
DISTORTION:
With 4 ohm loads, both
channels driven, from
200 – 20,000 Hz; rated
65 watts per channel
minimum RMS power,
with no more than 0.7 %
total harmonic distortion
from 250 milli watts to
rated output.
channels driven, from
200 – 20,000 Hz; rated
65 watts per channel
minimum RMS power,
with no more than 0.7 %
total harmonic distortion
from 250 milli watts to
rated output.
Amplifier section
Stereo mode (rated)
86 W + 86 W (4 ohms at
1 kHz, THD 10 %)
1 kHz, THD 10 %)
Surround mode (reference) music power output
Front:
86
W (each)
(with SS-TSL10)
Center*:
Center*:
86
W
(with SS-CTL10)
Surround*:
Surround*:
86
W
(with SS-TSL11)
Subwoofer*:
Subwoofer*:
85
W × 2
(with SA-WSLF10)
* Depending on the sound field settings and the source,
there may be no sound output.
Inputs
VIDEO/SAT:
Sensitivity: 300 mV
Impedance: 50 kilohms
Impedance: 50 kilohms
Phones
Accepts low-and high-
impedance headphones.
impedance headphones.
Super Audio CD/DVD system
Laser Semiconductor
laser
(Super Audio CD/DVD:
λ
= 650 nm)
(CD:
(CD:
λ = 780 nm)
Emission duration:
continuous
continuous
Signal format system
North America:
North America:
NTSC
Other regions:
NTSC, PAL
Specifications
continued