Sony DAV-DX355 Manual

X/x to select [YES], then press 

Set up the calibration mic at the ear level 
using a tripod, etc. (not supplied). The front 
of each speaker should face the calibration 
mic, and there should be no obstruction 
between the speakers and the calibration 
mic. Be quiet during the measurement.

Auto Calibration starts.

• Loud test sound is output when [AUTO 

CALIBRATION] starts. You cannot turn the 

volume down. Give consideration to children 
and neighbor.

• Avoid being in the measurement area and 

making noise during the measurement (which 
takes about 3 minutes), as it may interfere with 
measurement.

C/

c to select [YES].

Quick Setup is finished. All connections 
and setup operations are complete.

• If measurement fails, follow the message then 

retry [AUTO CALIBRATION].

Press 

 DISPLAY in any Step.

• If you change the position of the speakers, reset the 

speaker settings. See “Getting Optimal Surround 
Sound for a Room” (page 67) and “Calibrating the 
Appropriate Settings Automatically” (page 69).

• If you want to change any of the settings, see “Using 

A.CAL MIC

Calibration mic

Connect calibration mic. Start
measurement?

YES

AUTO CALIBRATION

NO

FRONT L :
FRONT R :
CENTER  :
SUBWOOFER :
SURROUND L :
SURROUND R :
If OK, unplug calibration mic and select
YES.

YES

YES
YES
NONE
YES
NONE
NONE

Measurement complete.

NO