Sharp 10P02-MA-NM User Manual

This turns the Quick Start function on and off.
When the Quick Start function is on: 

The startup time of the system is reduced.
However, power consumption will increase.

When the Quick Start function is off: 

The system will enter the low power consumption mode 
when in standby condition.

Yes, No

When “Quick Start” is set to “Yes”, the system requires 
some time to turn off.

•

This lets you set display of control panel on the TV 
screen on or off.

Yes, No

This lets you set the system to receive the control 
signal from the AQUOS LINK remote control via the 
HDMI cable.

Yes, No

For details, refer to the operation manual of TV.
If “Component” is selected from the “Video Out Select” 
menu, AQUOS LINK is not available. Select “HDMI” if you 
want to use AQUOS LINK features.

•
•

•
•

•

This lets you adjust the range between the loudest 
and softest sounds (dynamic range) for playback 
at average volume. Use this when it is hard to hear 
dialog.

Normal: The same audio output range is played as the 

original recorded audio output range.

Shift*: When Dolby Digital audio is played back, the 

dynamic range of the audio is adjusted so that the 
dialog portion can be heard easily. (If the audio sounds 
abnormal, set to “Normal”.)

Auto: When you play back audio in the Dolby TrueHD 

format, the dynamic range is automatically adjusted.

Lower the audio volume before setting. If you do not do so, 
the speakers may emit a loud sound or excessive output 
may be applied to the speakers.

If you change the “Dynamic Range Control” function to be 
effective, an effective “Dynamic Volume” function (page 66) 
becomes ineffective.

•

*

This lets you configure the speakers according to your 
surround sound environment.
See pages 39-40 for how to configure the speakers.
You cannot configure the speakers when a disc is loaded.
Remove the disc before configuring the speakers.

BD-MPC41U_E.indb   69

BD-MPC41U_E.indb   69

2010/02/04   16:15:00

2010/02/04   16:15:00