Tascam SN29401376 User Manual

The following table indicates the channels you should use 
depending on the number of speakers that you have. 
No matter how many speakers you use, a powered 
subwoofer is recommended for a really powerful and solid 
bass.
To get the best from your surround sound system, you need 
to set the speaker settings automatically (

➔ page 50).

*1

If you’re using only one surround back speaker, connect it to 
the SURR BACK or FRONT HIGH L PRE OUT terminals.

*2

Front high and surround back speakers cannot be used at the 
same time.

Front speakers

✔ ✔ ✔ ✔ ✔ ✔ ✔

Center speaker

✔

✔ ✔ ✔ ✔

Surround speakers

✔ ✔ ✔ ✔ ✔

Surround back speaker

✔

Surround back speakers

✔

Front high speakers

✔

The following illustration shows how to connect the speakers to each pair of terminals.

• You can specify whether surround back or front high speakers are connected in the “Speaker Configuration” menu (

➔ page 50) or during 

Audyssey 2EQ

®

 Room Correction and Speaker Setup (

➔ page 32).

■

Connect your Power amplifier’s analog audio input jacks 
to the AV receiver’s SURR BACK or FRONT HIGH 
L/R PRE OUT jacks with audio cables.
If you’re using only one surround back speaker, connect it 
to the SURR BACK or FRONT HIGH L PRE OUT 
terminals.

■

Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends 
of the speaker cables, and twist the bare wires tightly, as 
shown.

Front left

Center

Surround right

Front right

Surround back/

Front high right

Surround back/

Front high left

Surround left

Power amplifier

1/2" to 5/8" (12 to 15 mm)