Tascam SN29401376 User Manual

Page of 96
Advanced Operations
En-57
Audio Selector
Audio Selector
`
ARC:
The audio signal from your TV tuner can be sent to 
HDMI OUT of the AV receiver.
With this selection, the TV’s audio can be 
automatically selected as a priority among other 
assignments.
`
HDMI:
This can be selected when HDMI IN has been 
assigned as an input source. If both HDMI (HDMI 
IN
) and digital audio inputs (COAXIAL IN or 
OPTICAL IN) have been assigned, HDMI input is 
automatically selected as a priority.
`
COAXIAL:
This can be selected when COAXIAL IN has been 
assigned as an input source. If both coaxial and 
HDMI inputs have been assigned, coaxial input is 
automatically selected as a priority.
`
OPTICAL:
This can be selected when OPTICAL IN has been 
assigned as an input source. If both optical and HDMI 
inputs have been assigned, optical input is 
automatically selected as a priority.
`
Analog:
The AV receiver always outputs analog signals.
You can set priorities of audio output when there are both 
digital and analog inputs.
Note
• This setting can be made only for an input source that is assigned 
to HDMI INCOAXIAL IN, or OPTICAL IN.
• This setting cannot be used with the NET and USB input 
selectors.
*1
You can select “ARC” if you select the TV/CD input selector. 
But you cannot if you’ve selected “Off” in the “Audio Return 
Channel
” setting (
Setting the Incoming Digital Signal (Fixed 
Mode)
Fixed Mode
`
Off:
The format is detected automatically. If no digital 
input signal is present, the corresponding analog 
input is used instead.
`
PCM:
Only 2-channel PCM format input signals will be 
heard. If the input signal is not PCM, the PCM 
indicator will flash and noise may also be produced.
`
DTS:
Only DTS (but not DTS-HD) format input signals 
will be heard. If the input signal is not DTS, the dts 
indicator will flash and there will be no sound.
When “HDMI”, “COAXIAL” or “OPTICAL” is selected 
in the “Audio Selector” setting, you can then specify the 
signal type in “Fixed Mode”.
Normally, the AV receiver detects the signal format 
automatically. However, if you experience either of the 
following issues when playing PCM or DTS material, you 
can manually set the signal format to PCM or DTS.
• If the beginnings of tracks from a PCM source are cut off, 
try setting the format to PCM.
• If noise is produced when fast forwarding or reversing a 
DTS CD, try setting the format to DTS.
Note
• The setting will be reset to “Off” when you change the setting in 
Audio Selector”.
Main menu
Listening Mode Preset
You can assign a default listening mode to each input 
source that will be selected automatically when you select 
each input source. For example, you can set the default 
listening mode to be used with Dolby Digital input signals. 
You can select other listening modes during playback, but 
the mode specified here will be resumed once the AV 
receiver has been set to standby.
Listening Mode Preset
1
Use 
q/w to select the input source that you want to 
set, and then press 
ENTER.
The following menu appears.
1
2
3
4
5
Setup
Default listening mode for analog and PCM sources.
Analog/PCM
Mono/Multiplex Source
2ch Source
Dolby D/Dolby D Plus/TrueHD
DTS/DTS-ES/DTS-HD
Other Multich Source
5-1. Listening Mode Preset
BD/DVD
All Ch Stereo 
e r
Full Mono
PLIIx Movie
Straight Decode
Straight Decode
Straight Decode
To be continued