Vivitek DU6675 User Manual

DU6675 DLP Projector - User's Manual

40

This function is same as the shortcut key on the remote control. You can use the remote 

control or this function to select the correct input source. 

VGA: Select input source to VGA.

BNC: Select Input source from BNC, the input source can be RGBHV or Component 

signal from computer or component video enabled device.

DVI-D: Select input source from DVI-D output of the computer or media device.

Video: Select input source from video output of the media device.

S-Video: Select input source from S-Video output of the media device.

HDMI: Select input source from HDIMI output of the computer or media device.

Component: Select input source from component output of the media device.

HDBaseT: HDBaseT input source from the HDBaseT transmitter.

Use the ◄► function to turn on/off Auto Search for the input source.

You can use this function to set auto synchronization for the input signal.

Auto: The projector memorizes 10 sets of signal sources that you have used lately.

When the Auto option is selected, the projector will choose the signal that you use last.

Always: The auto sync function is executed every time.

This function allows you to change the corresponding color space for the input signal. In 

most cases, the correct color space can be selected automatically by Auto mode. If the 

selection is not correct, you can use a specific color space forcibly by selecting one of the 

following options:

Auto: The projector detects the input signal and switches to the corresponding color    

space automatically.

YCbCr: Set the color space to ITU-R BT.601.

YPbPr: Set the color space to ITU-R BT.709.