VIZIO SB4051-C0 User Manual

Function

LED Behavior

Description

Surround Balance

Two center LEDs

indicate Surround

Balance is centered.

Press the

Next/Previous button to increase/decrease the surround balance level on each

side. The LED indicators will move to the top with balance levels to the right and down

with balance levels to the left.

Subwoofer Levels

Two center LEDs

indicate Subwoofer

level 0.

Press the

Next/Previous button to increase/decrease the level of the subwoofer.

The LED indicators will move to the top with increasing levels and to the bottom

with decreasing levels.

Surround On/Off

Press the

Next/Previous button to enable/disable surround sound. When

enabled (On), all inputs will produce 5.1 surround sound. When disabled (Off), the

satellite speakers will be disabled.

DTS TruVolume

On/Off

Press the

Next/Previous button to enable/disable TruVolume. When enabled

(On), TruVolume provides a consistent and comfortable volume level for a more

enjoyable listening experience.

Night Mode On/Off

Press the

Next/Previous button to enable/disable Night Mode. When enabled

(On), the Sound Bar will lower bass frequency levels to provide a more quiet envi-

ronment (ideal for apartment living and homes with sleeping children).

AV Delay

LED at the bottom

indicates no delay.

Press the

Next/Previous button to increase/decrease the amount of audio delay.

The LED indicators will move to the top with increasing audio delay levels.

Speaker Test

—

Press the

Play/Pause button to activate the speaker test function. A voice will

begin calling out each speaker beginning with

left front. (Left Front, Center, Right

Front, Right Rear, Left Rear, and Subwoofer-white noise) If any of these are

missing, check the connection and run the speaker test function again.

Subwoofer

Surnd

TruVol

Night

Surr Bal

Surround On

Surround Off

TruVolume On

TruVolume Off

Night Mode On

Night Mode Off

AV Delay

Spkr Test