3M SCP7112 User Manual
3M
™ Super Close Projection System SCP712
Operator’s Guide
© 3M 2008. All Rights Reserved.
16
Picture Menu – Advanced
The Picture Menu with the Advanced option selected, shown below, is used to adjust the projected image for
Computer and Component inputs only.
Computer and Component inputs only.
Feature
Description
Range
Default
Over Scan
Adjust cropping of image boundaries from 90
th
to 100
th
percentile (increments of 1 percent)
90–100
Video = 97
VGA = 100
Brightness /
Color
Color
Adjust the white peaking value of the DMD.
(0 = lowest white peaking value, 10 = highest value)
(0 = lowest white peaking value, 10 = highest value)
0–10
Computer = 10
Video = 3
Horizontal
Position
Position
Adjust horizontal position of projected image
(Only for Computer 1 or Computer 2 input source)
(Only for Computer 1 or Computer 2 input source)
N/A 0
Vertical
Position
Position
Adjust vertical position of projected image
(Only for Computer 1 or Computer 2 input source)
(Only for Computer 1 or Computer 2 input source)
N/A 0
Frequency
Adjust the horizontal width of the projected image
(Only for Computer 1 or Computer 2 input source)
(Only for Computer 1 or Computer 2 input source)
-50–+50 0
Phase
Adjust clock phase to reduce image distortion
(Only for Computer 1 or Computer 2 input source)
(Only for Computer 1 or Computer 2 input source)
-15–+15 0
Reset
Reset values in Advanced Picture menu only
N/A
N/A
Picture
Input Source: Computer 1
Over Scan
97 |···········●············|
Color / Brightness
10 |·······················●|
Horizontal Position
0 |···········●············|
Vertical Position
0 |···········●············|
Frequency
0 |···········●············|
Phase
0 |···········●············|
Reset