Manualsbrain.com
  1. Manuals
  2. Brands
  3. Infocus
  4. IN114a
  5. User Manual

Infocus IN114a User Manual

Download
Page of 36
12
Shutting down the projector
Auto Off Time
The projector also has an Auto Off Time feature that automatically turns the 
projector off after no active sources are detected and no user interaction with the 
projector is performed for 30 minutes. By default, this feature is off. You can 
change the length of time, see page 30.
Turning off the projector
To turn the projector off, press the Power button on the remote or keypad. The 
lamp turns off and the Power LED blinks blue for 30 seconds while the fans 
continue to run to cool the lamp. If the Power Saving Mode feature is on and when 
the lamp has cooled, the LED lights blue and the fans stop. If the Power Saving 
Mode feature is off and when the lamp has cooled, the LED blinks blue and the fans 
stop. Unplug the power cable to completely power off the projector.
Troubleshooting your setup
If your image appears correctly on the screen, skip to the next section. If it does 
not, troubleshoot the setup.
The Status Indicator Lights on top of the projector indicates the state of the 
projector and can help you troubleshoot.
Table 6: Status Indicator Lights
Status Indicator Light
Meaning
POWER: Solid Blue
TEMP: Off
LAMP: Off
POWER: Blinking Blue
TEMP: Off
LAMP: Off
1. If the Power Saving Mode feature is 
on, the projector is plugged in.
2. The projector is on and initialized.
3. The projector is in normal operation.
1. If the Power Saving Mode is off, the 
projector is plugged in.
2. The projector is powering down and 
the fans are cooling the projector.
POWER: Blinking blue
TEMP: Blinking red
LAMP: Blinking red
POWER: Solid blue
TEMP: Blinking red
LAMP: Blinking red
The projector fan(s) are not operating 
correctly and the projector has been 
shut down.
The lamp failed to ignite.
Contact Technical Support if the 
problem persists. Visit 
www.infocus.com/support to contact 
service.
POWER: Solid blue
TEMP: Blinking red
LAMP: Blinking red
The lamp has reached its end of life and 
must be replaced. The lamp will 
continue to operate untils it fails.
Contact Technical Support. Repair may 
be needed.
POWER: Solid blue
TEMP: Blinking red
LAMP: Off
1. The projector is overheating and the 
lamp will be shut off. The fans will 
continue to run.
2. The projector will not turn back on 
until the cooling process is complete.