Infocus IN114a User Manual
21
Using the audio
Using the projector’s speakers
Connect the audio source to the Audio 1/Audio 2 connectors to hear audio
through the projector speakers.
Amplified speakers may also be connected to the projector using the Audio Out
connector.
To adjust the volume, press the Volume buttons on the remote.
Troubleshooting Audio
If you aren’t hearing the audio, check the following:
•
•
Make sure the audio cable is connected to the Audio 1/Audio 2 connector on
the projector, and that the other end of the cable is connected to an Audio
Out connector on the source (not a “line-in” or “microphone” connector).
•
Make sure the volume is turned up enough. Press the Volume button on the
remote.
•
Make sure the correct source is active.
•
Adjust the audio source.
•
If playing a video, make sure the playback has not been paused.
connect audio cable