Infocus IN114a User Manual

Connecting a computer source

VGA connection

Connect one end of the provided computer cable to th Computer 1/Computer 2

connector on the projector and the other to the VGA connector on your

computer. If you are using a desktop computer, you will need to disconnect the

monitor cable from the computer’s video port first.

HDMI connection

HDMI is a standard, uncompressed, all-digital audio/video interface. HDMI

provides an interface between sources, such as set-top boxes, DVD players, and

receivers and your projector. Plug an HDMI cable into the video-out connector on

the video device and into the HDMI connector on the projector.
NOTE: The IN112aT/IN114aT do not have an HDMI connector.

Connecting power

Connect the black power cord to the Power connector on the rear of the

projector and to your electrical outlet. If the Power Saving Mode feature is off, the

Power LED on the Status Indicator Panel (page 12) blinks blue. If the Power Saving

Mode feature is on, the Power LED is steady blue. By default, this feature is off.

You can change the setting, see page 29. NOTE: Always use the power cord that

shipped with the projector.

Optional computer connections

To get sound from the projector, connect an audio cable (optional cable, not

included) to your computer and to th Audio 1/Audio 2 connector on the

projector. You may also need an adapter.

If you are using a desktop computer and want to see the image on your computer

screen as well as on the projection screen, connect to the desktop’s computer

cable to Computer 1 and the desktop’s monitor cable to the Monitor Out

connector on the projector.

connect VGA cable

connect HDMI

connect power

connect audio cable