Insignia 29400403A User Manual
13
Insignia NS-HTIB51A 5.1 Channel Home Theater System
www.insigniaproducts.com
Before using this function, connect and position all
of your speakers.
It takes about 15 minutes to complete the room
correction and speaker setup for three positions.
Total measurement time varies depending on the
number of speakers.
of your speakers.
It takes about 15 minutes to complete the room
correction and speaker setup for three positions.
Total measurement time varies depending on the
number of speakers.
Using Audyssey 2EQ
To create a listening environment in your home
theater that all listeners can enjoy, Audyssey 2EQ
takes measurements at up to three positions within
the listening area.
Position the microphone at ear height of a seated
listener with the microphone tip pointed directly at
the ceiling using a tripod. Do not hold the
microphone in your hand during measurements as
this produces inaccurate results.
First measurement position (1)–Also referred to
as the Main Listening Position this refers to the
most central position where one would normally sit
within the listening environment. 2EQ uses the
measurements from this position to calculate
speaker distance, level, polarity, and the optimum
crossover value for the subwoofer.
Second measurement position (2)–The right side
of the listening area.
Third measurement position (3)–The left side of
the listening area.
The distances from position 1 to 2 and 1 to 3 must
be at least 3.3 feet (1 meter).
theater that all listeners can enjoy, Audyssey 2EQ
takes measurements at up to three positions within
the listening area.
Position the microphone at ear height of a seated
listener with the microphone tip pointed directly at
the ceiling using a tripod. Do not hold the
microphone in your hand during measurements as
this produces inaccurate results.
First measurement position (1)–Also referred to
as the Main Listening Position this refers to the
most central position where one would normally sit
within the listening environment. 2EQ uses the
measurements from this position to calculate
speaker distance, level, polarity, and the optimum
crossover value for the subwoofer.
Second measurement position (2)–The right side
of the listening area.
Third measurement position (3)–The left side of
the listening area.
The distances from position 1 to 2 and 1 to 3 must
be at least 3.3 feet (1 meter).
To use Audyssey to set up and correct your
speakers:
speakers:
1 Turn on the receiver and the connected TV.
2 On the TV, select the input to which the receiver
is connected.
3 Set the speaker setup microphone at the Main
Listening Position 1, and connect it to the
SETUP MIC jack on the front of the receiver.
SETUP MIC jack on the front of the receiver.
The speaker setting menu appears.
4 Press ENTER.
The room correction and speaker setup starts.
Test tones are played through each speaker as
Audyssey 2EQ Room Correction and Speaker
Setup runs. This process takes a few minutes.
Refrain from talking during measurements and
do not stand between speakers and the
microphone. Do not disconnect the speaker
setup microphone during the room correction
and speaker setup unless you want to cancel the
setup.
Test tones are played through each speaker as
Audyssey 2EQ Room Correction and Speaker
Setup runs. This process takes a few minutes.
Refrain from talking during measurements and
do not stand between speakers and the
microphone. Do not disconnect the speaker
setup microphone during the room correction
and speaker setup unless you want to cancel the
setup.
5 Place the setup microphone at the next
position, then press ENTER.
Audyssey 2EQ performs more measurements.
This takes a few minutes.
This takes a few minutes.
6 When prompted, place the setup microphone at
the next position, then repeat step 5.
7 Use
or
to select an option, then press
ENTER. The options are:
• Save–To save the calculated settings and exit
the room correction and speaker setup.
• Cancel–To cancel the room correction and
speaker setup.
8 Disconnect the speaker setup microphone.
Notes
•
Make the room as quiet as possible. Background
noise and Radio Frequency Interference (RFI)
can disrupt the room measurements. Close
windows, and turn off televisions, radios, air
conditioners, fluorescent lights, home
appliances, light dimmers, or other devices.
Silence the cell phone (even if it is not in use) or
place it away from all audio electronics.
noise and Radio Frequency Interference (RFI)
can disrupt the room measurements. Close
windows, and turn off televisions, radios, air
conditioners, fluorescent lights, home
appliances, light dimmers, or other devices.
Silence the cell phone (even if it is not in use) or
place it away from all audio electronics.
•
The microphone picks up test tones which
played through each speaker as Audyssey 2EQ
Room Correction and Speaker Setup run.
played through each speaker as Audyssey 2EQ
Room Correction and Speaker Setup run.
Note
•
Room correction and speaker setup cannot be
performed while a pair of headphones is
connected.
performed while a pair of headphones is
connected.
TV
Note
The on-screen setup menus only appear on a TV that
is connected to the HDMI OUT jack. If your TV is
connected to the MONITOR OUT V or COMPONENT
VIDEO OUT jacks, use the receiver’s display when
changing the settings.
is connected to the HDMI OUT jack. If your TV is
connected to the MONITOR OUT V or COMPONENT
VIDEO OUT jacks, use the receiver’s display when
changing the settings.
Note
You can view the calculated settings for the speaker
configuration, speaker distances, and speaker levels
by using
configuration, speaker distances, and speaker levels
by using
or
.
Notes
•
When Audyssey 2EQ Room Correction and
Speaker Setup is complete, Audyssey is set to
On and the Audyssey indicator lights.
Speaker Setup is complete, Audyssey is set to
On and the Audyssey indicator lights.
•
You can cancel Audyssey 2EQ Room Correction
and Speaker Setup at any point in this
procedure by disconnecting the setup
microphone.
and Speaker Setup at any point in this
procedure by disconnecting the setup
microphone.
•
Do not connect or disconnect any speakers
during Audyssey 2EQ Room Correction and
Speaker Setup.
during Audyssey 2EQ Room Correction and
Speaker Setup.
•
If the receiver is muted, it will be unmuted
automatically when Audyssey 2EQ Room
Correction and Speaker Setup starts.
automatically when Audyssey 2EQ Room
Correction and Speaker Setup starts.
•
Changes to the room after Audyssey 2EQ Room
Correction and Speaker Setup requires that you
run Audyssey 2EQ Room Correction and
Speaker Setup again, as room EQ characteristics
may have changed.
Correction and Speaker Setup requires that you
run Audyssey 2EQ Room Correction and
Speaker Setup again, as room EQ characteristics
may have changed.
SETUP MIC jack
Speaker setup microphone
NS-HTIB51A_10-0114_MAN_.book Page 13 Tuesday, April 13, 2010 10:19 AM