Insignia 29400403A User Manual
5
Insignia NS-HTIB51A 5.1 Channel Home Theater System
www.insigniaproducts.com
Front, center, and surround speakers
Remote control
Setting up your home
theater system
theater system
Finding a location for your home theater
system
system
• Install your home theater system on a stable flat
surface. Position your receiver so that it has a
direct line of sight to the remote control.
direct line of sight to the remote control.
• Do not expose your system to extremes of
temperature or humidity.
• Avoid placing your system on a hot surface such
as on top of other hot running equipment. Make
sure that there is adequate ventilation to your
system.
sure that there is adequate ventilation to your
system.
#
Description
Function
1
Keyhole slots
Used to wall-mount the speakers.
2
Speaker terminals
These push terminals are for connecting the
speaker to the receiver with the supplied
speaker cables.
speaker to the receiver with the supplied
speaker cables.
3
Threaded Inserts
These threaded inserts are for Init®-Home
Theater Speaker Mounts NT-SWM series.
Theater Speaker Mounts NT-SWM series.
Item Description
Function
1
ON/STANDBY button
Press to turn the power on to your receiver.
Press again to go to standby mode.
Press again to go to standby mode.
2
Remote mode input selector
buttons
buttons
Press to directly select your receiver input
source.
source.
SC-51A
a
b
c
a
b
c
a
b
c
Front speakers
Rear speakers
Center speaker
3
ENTER
/
/
/
TUNING+/–
Press the arrow keys to navigate through the
on-screen menus. Press ENTER to confirm a
selection or setting.
In tuning mode, press to tune to the next
(TUNING+) or previous (TUNING–) station.
on-screen menus. Press ENTER to confirm a
selection or setting.
In tuning mode, press to tune to the next
(TUNING+) or previous (TUNING–) station.
4
SETUP button
Press to open the on-screen menus.
5
LISTENING MODE buttons
Press to select the listening mode you want.
See “Using the listening modes” on page 16
for additional information.
See “Using the listening modes” on page 16
for additional information.
6
D.TUN
DIMMER
In tuner mode, press D.TUN, then the
number buttons to tune directly to a
frequency.
Press DIMMER to adjust the brightness of
the display.
number buttons to tune directly to a
frequency.
Press DIMMER to adjust the brightness of
the display.
7
DISPLAY button
Press repeatedly to cycle through the
available input source information.
available input source information.
8
RECEIVER button
Press to control the receiver.
9
MUTING button
Press to mute the sound output from the
receiver.
receiver.
10
TUNE MODE button
Press to toggle between auto and manual
tuning modes.
tuning modes.
11
VOL
/
buttons
Press to increase or decrease the sound
volume.
volume.
12
CH +/– buttons
ALBUM
ALBUM
In tuner mode, press to go to the next or
previous preset channel.
previous preset channel.
13
RETURN button
In menu mode, press to return to the main
menu.
menu.
14
AUDIO button
Press to access audio settings. See
“Changing audio settings” on page 24.
“Changing audio settings” on page 24.
15
Number buttons
Press to enter a preset number or to
manually tune the radio.
manually tune the radio.
16
SLEEP/CLR button
Press repeatedly to select the sleep timer
duration.
In menu mode, press to clear an entry.
duration.
In menu mode, press to clear an entry.
Caution
Do not install the receiver in a confined space such as
a bookcase.
a bookcase.
Caution
Connect the AC cord only after the speakers,
antenna, and all optional equipment have been
connected. Never make or change any
connections with the power turned on.
antenna, and all optional equipment have been
connected. Never make or change any
connections with the power turned on.
Item Description
Function
NS-HTIB51A_10-0114_MAN_.book Page 5 Tuesday, April 13, 2010 10:19 AM