HP (Hewlett-Packard) Digital Entertainment Center User Manual
Initial Configuration
131
Initial Configuration
5
In the Sound Recording area, click the Volume
button, and then choose the source for sound
recording.
button, and then choose the source for sound
recording.
6
Click OK.
7
Close the window.
Adjusting the Volume
To adjust speaker volume, use the:
■
Remote control.
■
TV.
■
AV receiver.
■
Buttons on the keyboard.
■
Volume knob on the speakers.
■
Volume knob on the subwoofer.
■
Volume knob on the monitor (if connected).
■
Volume controls within a program, such as the
volume buttons on the Media Center navigation bar
or on the remote control.
volume buttons on the Media Center navigation bar
or on the remote control.
■
Volume icon on the taskbar. Double-click and adjust
the volume.
the volume.
Some applications may play back at low volume, even
when the volume knob is turned to the maximum position.
If this is the case, double-click the Volume icon on the
taskbar and increase the volume.
when the volume knob is turned to the maximum position.
If this is the case, double-click the Volume icon on the
taskbar and increase the volume.
Locating the volume icon
If you do not see the Volume icon on the taskbar:
1
Click Start, and then Control Panel. Click Sounds,
Speech, and Audio Devices, if it is present.
Speech, and Audio Devices, if it is present.
2
Double-click Sounds and Audio Devices. The
Sounds and Audio Devices Properties window
opens.
Sounds and Audio Devices Properties window
opens.
This window is easier to read on a monitor. You can
lower the display resolution to read the window. You
will need the keyboard and mouse.
lower the display resolution to read the window. You
will need the keyboard and mouse.
3
Click the Volume tab. Place a check in the Place
volume icon in the taskbar check box.
volume icon in the taskbar check box.
4
Click Apply, and then click OK. The Volume icon
appears in the taskbar.
appears in the taskbar.
n
Audio distortion may occur if recording
volume is set too high.
volume is set too high.
w
Ensure that the mute box is not checked.