Insignia NS-AV511 User Manual
8
Insignia NS-AV511 Surround Sound Receiver
www.insigniaproducts.com
AV cables and jacks
Deciding which connections to use
The receiver supports several connection formats
for compatibility with a wide range of AV
equipment. The format you choose depends on the
formats supported by your components. Use the
following sections as a guide.
for compatibility with a wide range of AV
equipment. The format you choose depends on the
formats supported by your components. Use the
following sections as a guide.
Video connection formats
Video components can be connected by using any
one of the following video connection formats
(shown best first): HDMI, component video, or
composite video.
one of the following video connection formats
(shown best first): HDMI, component video, or
composite video.
When choosing a connection format, bear in mind
that the receiver does not convert between formats,
so only outputs of the same format as the input will
output the signal.
that the receiver does not convert between formats,
so only outputs of the same format as the input will
output the signal.
Audio connection formats
Audio components can be connected by using any
of the following audio connection formats (shown
best first):
of the following audio connection formats (shown
best first):
• HDMI
• Optical
• Coaxial
• Analog
• Optical
• Coaxial
• Analog
Signal
Cable
Jack
Description
Video and
audio
audio
HDMI
HDMI connections can carry digital video and audio.
Video
Component video
Component video is a better alternative to Composite video, and
is used for TVs, VCRs, DVD and Blu-ray players.
is used for TVs, VCRs, DVD and Blu-ray players.
Composite video
Yellow
Composite video is commonly used on TVs, VCRs, and other video
equipment.
equipment.
Audio
Optical digital audio
Optical digital connections allow you to enjoy digital sound such
as PCM or Dolby Digital. The audio quality is the same as coaxial.
as PCM or Dolby Digital. The audio quality is the same as coaxial.
Note: The available sampling rate for PCM input signals is
32/44.1/48/88.2/96 kHz. Even 176.4/192 kHz is effective in case of the
HDMI connection.
32/44.1/48/88.2/96 kHz. Even 176.4/192 kHz is effective in case of the
HDMI connection.
Coaxial digital audio
Orange
Coaxial digital connections allow you to enjoy digital sound such
as PCM
as PCM
or Dolby Digital. The audio quality is the same as optical.
Note: The available sampling rate for PCM input signals is
32/44.1/48/88.2/96 kHz. Even 176.4/192 kHz is effective in case of the
HDMI connection.
32/44.1/48/88.2/96 kHz. Even 176.4/192 kHz is effective in case of the
HDMI connection.
Analog audio (RCA)
Analog audio connections (RCA) carry analog audio.
HDMI
Y
Pb/Cb
Pr/Cr
Y
Pb
Pr
Y
OPTICAL
DIGITAL
R
L
Notes
The AV receiver’s optical digital jacks have
shutter-type covers that open when an optical plug is
inserted and close when it’s removed. Push plugs in
all the way.
shutter-type covers that open when an optical plug is
inserted and close when it’s removed. Push plugs in
all the way.
Caution
To prevent shutter damage, hold the optical plug
straight when inserting and removing.
straight when inserting and removing.
Notes
•
The on-screen setup menus appear only on a TV
that is connected to the HDMI OUT. If your TV is
connected to the MONITOR OUT V or the
COMPONENT VIDEO OUT, use the receiver’s
display when changing settings.
that is connected to the HDMI OUT. If your TV is
connected to the MONITOR OUT V or the
COMPONENT VIDEO OUT, use the receiver’s
display when changing settings.
•
The on-screen setup menus are displayed when
there is no video input, or the video input is
480p, 720p, 1080i, or 1080p.
there is no video input, or the video input is
480p, 720p, 1080i, or 1080p.
IN
MONITOR OUT
Blu-ray Disc, DVD player, etc.
TV, projector, etc.
Composite
Composite
Component
Component
Video Signal Flow Chart
HDMI
HDMI
White
Red
Green
Blue
Red
NS-AV511_11-0201_MAN_.book Page 8 Wednesday, April 13, 2011 9:31 AM