Insignia NS-AV511 User Manual

Insignia NS-AV511 Surround Sound Receiver

www.insigniaproducts.com

The SLEEP indicator lights on the display when 
the sleep timer has been set. The specified sleep 
time appears on the display for about five 
seconds, then the previous display reappears.

To use headphones:
• Connect a pair of stereo headphones with a 

standard plug (1/4 in. or 6.3 mm) to the PHONES 
jack.

With the built-in tuner you can enjoy AM and FM 
radio stations. You can store your favorite stations 
as presets for quick selection.

To listen to the radio:
• Press TUNER to select either AM or FM (each time 

you press TUNER, the radio band changes 
between AM and FM).

In this example, FM has been selected.

• To automatically tune to a station:

• Press TUNING MODE until the AUTO 

indicator appears on the display.

• Press TUNING 

 or 

. The receiver 

automatically searches for stations and 
stops when a station is found.

- OR - 

• To manually tune to a station:

• Press TUNING MODE until the AUTO 

indicator goes off.

• Press and hold TUNING  

or . 

The 

receiver tunes up or down the frequency 
band as long as you hold the button. Press 
the button repeatedly to tune up or down 
by steps.

- OR - 

• To tune to a station by entering the frequency:

• Using the remote control, press TUNER 

repeatedly to select AM or FM, then press 
D.TUN.

• Within eight seconds, press the number 

buttons to enter the frequency of the radio 
station you want. For example, to tune to 
87.50, press 8, 7, then 5.

You can store a combination of as many as 40 of 
your favorite AM or FM stations as presets.

1 Tune to the FM or AM station that you want to 

store as a preset. See “Listening to the radio” on 
page 17 for information on tuning your receiver.

2 Press MEMORY. The preset number flashes.

3 While the preset number is flashing (about eight 

seconds), press PRESET 

 or 

 to select a 

preset number from one through 40.

4 Press MEMORY again to store the station or 

channel. The station or channel is stored and the 
preset number stops flashing.

5 Repeat steps 1 through 4 to preset your favorite 

radio stations.

• To select a preset, press PRESET  

or  

on 

the receiver, or press CH +/– on the remote 
control.

•

To cancel the sleep timer, press SLEEP 
repeatedly until the SLEEP indicator goes off.

•

To check the time remaining until the receiver 
turns off, press SLEEP. If you press SLEEP while 
the sleep time is being displayed, the sleep time 
is shortened by 10 minutes.

•

Always turn down the volume before 
connecting your headphones.

•

While the headphones plug is inserted in the 
PHONES jack, the speakers are turned off.

•

When you connect a pair of headphones, the 
listening mode is set to Stereo, unless it is 
already set to Stereo, Mono, or Direct.

•

The listening modes cannot be selected while a 
pair of headphones is connected.

The procedures described in this section use the 
buttons on the front panel, unless otherwise 
specified.

Band

Frequency

AUTO

FM Stereo

TUNED

You can also press the TUNE MODE and arrow 
buttons on the remote control.

•

In Manual Tuning mode, FM stations are in 
mono.

•

If the signal from a stereo FM station is weak, it 
may be impossible to get good reception. In this 
case, switch to Manual Tuning mode and listen 
to the station in mono.

•

You can also press the TUN MODE and arrow 
buttons on the remote control.

You can also press the number buttons on the 
remote control to select a preset station directly.

NS-AV511_11-0201_MAN_.book  Page 17  Wednesday, April 13, 2011  9:31 AM