JVC LVT1002-012B User Manual
18
Speaker settings
When selecting “MEDIUM ROOM,”
• Center speaker delay time
• Center speaker delay time
is set to1 msec.
• Surround speakers delay time
is set to 2 msec.
ANALOG
SUBWFR
VOL
L
R
SUBWFR
FRNT SP
LFE
DIGITAL IN
AUTO SR
DVD VIDEO
QUICK SETUP
(Back to the beginning)
CNTR SP
SURR DL
CROSS
CNTR DL
D.COMP
SURR SP
DBS VIDEO
3
Turn MULTI JOG to select the appropriate setting
for the item selected in step
for the item selected in step
2, then press SET.
Your setting is stored.
EX.: When selecting “NO” for “SUBWFR.”
4
If you would like to set other items, repeat steps
2 and 3.
2 and 3.
Setting the subwoofer information
— SUBWFR (subwoofer)
Register whether you have connected a subwoofer or not.
YES*:
Select when you have connected a subwoofer.
The subwoofer speaker indicator (
The subwoofer speaker indicator (
SUBWFR
) lights up
on the display (see page 15). You can adjust the
subwoofer output level (see page 22).
subwoofer output level (see page 22).
NO:
Select when you have not connected or have
disconnected a subwoofer.
disconnected a subwoofer.
* Initial setting
Setting the speakers size
— FRNT SP (front speakers), CNTR SP (center
speaker), SURR SP (surround speakers)
Register the sizes of all the connected speakers.
LRG (large):
Select when the cone speaker size is larger than
12 cm.
12 cm.
SML (small)*: Select when the cone speaker size is smaller than
12 cm.
NO:
Select when you have not connected a speaker. (Not
selectable for the front speakers.)
selectable for the front speakers.)
* Initial setting
NOTES
• If you have selected “SML (small)” for the front speaker size, you
cannot select “LRG (large)” for the center and surround speaker
sizes.
sizes.
• If you have selected “NO” for the subwoofer setting (see above and
page 17), you can only select “LRG (large)” for the front speaker
size.
size.
ANALOG
VOL
L
R
2.7 m
C
2.4 m
2.1 m
L
R
LS
RS
When selecting “LARGE ROOM,”
• Center speaker delay time
• Center speaker delay time
is set to 0 msec.
• Surround speakers delay time
is set to 0 msec.
C
L
R
LS
RS
3.0 m
Setting the speakers and subwoofer
information manually—Manual Setup
information manually—Manual Setup
You can set the following speakers and subwoofer information
manually as you prefer. When you change your speakers, register the
information again.
manually as you prefer. When you change your speakers, register the
information again.
• Subwoofer information—SUBWFR
• Speaker size—FRNT SP, CNTR SP, SURR SP
• Speaker delay time—CNTR DL, SURR DL
• Crossover frequency—CROSS
• Low frequency effect attenuator—LFE
• Dynamic range compression—D.COMP
• Speaker size—FRNT SP, CNTR SP, SURR SP
• Speaker delay time—CNTR DL, SURR DL
• Crossover frequency—CROSS
• Low frequency effect attenuator—LFE
• Dynamic range compression—D.COMP
Operating procedure
On the front panel ONLY:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
1 again.
1
Press SETTING.
MULTI JOG now works for the setting operation.
2
Turn MULTI JOG until the setting item you want
to set appears on the display, then press SET.
to set appears on the display, then press SET.
• As you turn MULTI JOG, the indication changes as follows:
STANDBY / ON
STANDBY
DIMMER
SETTING
ADJUST
SURROUND
DVD MULTI
DVD
DBS
VCR
TV
FM / AM
SET / TUNER PRESET
SOURCE SELECTOR
MASTER VOLUME
PHONES
/ MULTI JOG
EN16-21RX-ES1&XV-NK58[A]f
03.6.6, 11:56
18