Bretford UNI-3 Leaflet
STEP 3
Attach machine rests between pedestals
using screws (BB) and flange nuts (CC) as
shown. The spacing of the machine rests is
determined by your printer size.
using screws (BB) and flange nuts (CC) as
shown. The spacing of the machine rests is
determined by your printer size.
CC
STEP 4
Hook wire basket into the slots on
the back of the unit.
the back of the unit.
STEP 6
NOTE: Included in your hardware
pack is ground wire. Consult your
printer manual for proper procedures.
pack is ground wire. Consult your
printer manual for proper procedures.
If printer is larger than printer stand, use the extender
brackets to give you additional length. Place extender
brackets on machine rests and fasten with screws (BB)
and flange nuts (CC) as shown. Slide extender brackets
out to desired.
brackets to give you additional length. Place extender
brackets on machine rests and fasten with screws (BB)
and flange nuts (CC) as shown. Slide extender brackets
out to desired.
Part# 031-1050
Rev. 09.24.97
Rev. 09.24.97
STEP 5
Fasten machine rest cups (DD) onto machine rests OR
extender brackets (if used) using carriage bolts (EE),
washer (FF) and wing nut (GG) as shown. The location
of machine rest cups is determined by the printer size.
Once everything is attached, place your printer on stand.
extender brackets (if used) using carriage bolts (EE),
washer (FF) and wing nut (GG) as shown. The location
of machine rest cups is determined by the printer size.
Once everything is attached, place your printer on stand.
GG
DD
EE
FF
Bretford
Bretford Ltd.
11000 Seymour Avenue
Technology House
Franklin Park, IL 60131
7 Lake End Court, Taplow
TEL: 847.678.2545
Bucks SL6 0JQ England
800.521.9614
TEL: 01628 603558
FAX: 847.678.0852
FAX: 01628 604923
800.343.1779
www.bretford.com