LevelOne WBR-6022 User Manual

WBR-6022

It used to be that if you wanted to set up a surveillance 

system you needed deep networking knowledge or 

had to call a professional installer to get the job done.  

But now the new LevelOne HomeGuard22 (WBR-6022) 

lets you build and customize a system on your own: 

quickly and effortlessly.

All of the technical details (IP address assignment, 

port-forwarding, etc) takes place within the 

router.  Just plug the camera(s) into the back of the 

HomeGuard22 and it will discover and configure each 

device for optimal compatibility.  

With your new security system up and running, users 

can view their cameras to check in on their family or 

pets while they’re away. The LevelOne DNS™ service 

points directly to your cameras for fast and easy 

viewing.  Just open up any browser and type in your 

device address and you can see your cameras no 

matter where you are in the world.   

The HomeGuard22 system is also compatible with 

LevelOne’s NAS series to record video for an extra level 

of security.

-  2 External and 1 internal antennas with 2T/3R MIMO 

Technology for Wireless Data Rates of up to 300Mbps

-  Home Surveillance with Multi-Camera Live 

Monitoring, Snapshot, Recording* and Playback

-  Supports up to 4 Live Video Feeds

-  Supports Continuous, Manual or Scheduled 

Recording* Modes

-  Playback with Media Player Software

-  Remote Access with Level1DNS™ Service

-  Wireless Security with WEP, WPA, WPA2, 802.1x 

RADIUS

-  Built-In Firewall and Quality of Service

-  Quick and Easy Setup Wizards

11b/g Wireless P/T/Z IP 

Network Camera

H/W Version: 1

2

4 5

6

3

1

7

1. Wireless Signal On/Off Button

2. LED Indicators

3. WiFi Protected Setup(WPS) Button

4. Sleep Button

5. Power Port

6. LAN Interface

7. WAN Interface

*  To record IP camera video feeds, WBR-6022 must be used with 

FNS-1020 (H/W: 2.0)

1-Bay Simple Network Storage 

(H/W: 2.0)