Bose Cinemate User Manual

Using the System

You can switch between sources by pressing the appropriate source button on the 

remote control. Before you begin, program the remote to control your source  

(see page 24).

®

If your source is connected to the console and does not use CEC, follow this 

procedure to set the console to the appropriate mode and turn on the source.
1.  Power on the system.
2.  Press the button for the source you want to control.

The source button glows.

3.  Press 

.

The source powers on.

If your source is connected to your TV, follow this procedure to select the 

appropriate TV input.
1.  Power on the system, your TV and the appropriate source.
2.  Press 

 to select the correct input on your TV. 

You may need to press 

 several times to select the TV input for  

the source.
On some TVs, 

 displays a menu. Use the remote control to choose the 

correct TV input and close this menu.

The source buttons on your remote control correspond with the connectors on  

the back of the console. For example, 

 corresponds with the 

HDMI

™

 connector.

Your source buttons work with any source that is connected to the corresponding 

connector. If you have a secondary DVD or Blu-ray Disc

™

 player and connect it to 

the 

CBL-SAT connector, it can be programmed to work with 

. 

If you are using the optical, coaxial, or analog connectors, you must set the input 

for the appropriate source. You can access these settings using the System menu 

(see page 27).