Shindaiwa 80732 User Manual

6

PB2500 Dry Weight (less sweepers) ............................................................ 4.7 kg/10.4 lb.

PB2500 Dry Weight (Including sweepers) .................................................. 9.5 kg/21.0 lb.

Engine Model ........................................................................................ Shindaiwa SF2500E

Engine Type ..................................................... Shindaiwa C4, vertical-cylinder, air-cooled

Bore x Stroke .................................................................................. 34 x 27 mm/1.3 x 1.1 in.

Displacement ............................................................................................. 24.5 cc/1.5 cu. in.

Maximum Power Output .......................................... 1.1 HP (0.8 kW) @ 7500 rpm (min

-1

)

Fuel/Oil Ratio ........................................ 50:1 with Shindaiwa Premium 2-cycle mixing oil

Fuel Tank Capacity ....................................................................................... 600 ml/20.3 oz.

Carburetor Type ................................................................... Walbro WYL, diaphragm-type

Ignition ............................................................. One-piece electronic, transistor-controlled

Spark Plug ......................................................................................................... NGK CMR6H

Air Cleaner Type .....................................................  Non-reversible flocked filter element

Starting Method ............................................................................................................ Recoil

Stopping Method ................................................................................................. Slide switch

Transmission Type ............................................ Automatic, centrifugal clutch w/worm gear

EPA Emission Compliance Period* ................................................................... Category A

Before assembling, make sure you have
all the components required for a com-
plete unit:
■ Engine assembly
■ Outer tube assembly
■ Drum kit w/gearcase
■ Correct operators handle (see preced-

ing page)

■ Kit containing operator’s handle and

hardware, this manual and tool kit for
routine maintenance. Tool kits vary by
model and may include a hex wrench,
spanner and a combination spark plug
wrench/screwdriver.

Carefully inspect all components for
damage.

The terms “left”, “left-hand”, and “LH”;
“right”, “right-hand”, and “RH”; “front”
and “rear” refer to directions as viewed
by the operator during normal operation.

*Specifications are subject to change without notice.

*The EPA emission compliance period referred to on the emission compliance label located on the engine, indicates the
number of operating hours for which the engine has been shown to meet Federal emission requirements. Category C = 50
hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended)

PB03

Outer Tube

Grip

Using the accompanying illustrations as a
guide, familiarize yourself with this unit
and its various components. Understand-
ing the product helps ensure top perform-
ance, long service life, and safer opera-
tion. See Figure 4.

Do not make unauthorized modifica-
tions or alterations to this unit or
components.

Gearcase

Throttle

Trigger

Tank

Protector

Ignition

Switch

Spark

Plug

Fuel

Tank

Sweeper

Belt

Sweeper

Drum

Handle