Shindaiwa 82052 User Manual

9

Required Tools: 

Screwdriver

Never perform maintenance or assembly procedures with engine 
running, or serious personal injury may result.

  1.  Align grooves in straight pipe with pegs on blower housing and 

slide pipe onto housing.

  2.  Turn straight pipe clockwise to lock into place.

  3.  Align grooves in fan head nozzle with pegs on straight pipe and 

slide fan head nozzle onto straight pipe.

  4.  Turn fan head nozzle clockwise to lock into place.

  1.  Turn knob (A) counter clockwise until hinged housing cover is 

free to open for vacuum tube installation.

  2.  Loosen screw (B). Do not remove clamp from blower housing.

  3.  While holding housing cover open, align arrow on vacuum tube 

with interlock switch (D), and install vacuum tube into blower 

housing.  Secure vacuum tube with clamp (B).  Clamp fits under 
slotted guides (C).

NOTE
Engine will not start/operate unless safety interlock switch (D) is 
activated by the vacuum tube.

  4.  Remove blower pipe assembly from unit.