Grizzly H0587 Leaflet
Specifications
Operating Pressure .................................. 90 PSI
Air Inlet ....................................................
Air Inlet ....................................................
1
⁄
4
" NPT
Weight ......................................................1
1
⁄
2
lbs.
Inventory (Figure 1)
Qty
A. Hose ........................................................... 1
B. Vacuum ...................................................... 1
C. Extension Tube .......................................... 1
D. Hose Clamps .............................................. 2
E. Dust Collection Bag .................................... 1
MODEL H0587
AIR WONDER
VACUUM KIT
INSTRUCTION SHEET
Figure 1. Model H0587 inventory.
COPYRIGHT © MARCH, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL9088 PRINTED IN TAIWAN
EYE INJURY HAZARD!
Always wear safety glasses
during use to prevent
serious personal injury.
INJURY HAZARD!
When servicing, always dis-
connect tool from air to pre-
vent unexpected operation.
120 PSI
MAX AIR PRESSURE!
Exceeding this PSI may
result in injury/tool damage.
A
C
B
D
E
Assembly
1. Insert the extension tube into the front of the
vacuum, and install a
1
⁄
4
" NPT male quick-dis-
connect fitting (not included) into the bottom
of the vacuum.
of the vacuum.
2. Place a clamp on the funnel-shaped end of
the hose, insert the vacuum into the hose,
and tighten the clamp (see
and tighten the clamp (see
Figure 2).
Figure 2. Vacuum kit assembled.
3. Place a clamp over the dust collection bag,
insert the end of the hose into the bag, and
tighten the clamp (see
tighten the clamp (see
Figure 2).
LUNG INJURY HAZARD!
Always wear a respirator
during use to reduce
exposure to dust.
Trigger
Hose
Clamps