Sony MZ-NH600D User Manual

Page of 80
44
 model name1[MZ-NH600D] model name2[MZ------]
 [3-266-467-11(1)]
masterpage:Left
filename[D:\WW08\MORO\3266467111\3266467111MZNH600DU\01GB-
MZNH600DU\040OPE.fm]
You cannot operate 
the player (“PC – 
–MD” appears).
• You cannot operate the player while the player is connected to the 
computer.
Symptom
Cause/Remedy
Others
Symptom
Cause/Remedy
Some menu items 
cannot be displayed.
• “Menu Mode” is set to “Simple”.
, Set the “Menu Mode” to “Advanced” to display all the menu 
items.
The player does not 
work or works 
poorly.
• The volume is low.
, Turn up the volume.
• No disc is inserted.
, Insert a recorded disc.
• The HOLD function is turned on (“HOLD” appears in the display 
when you press an operation button on the player).
, On the player, disable HOLD by sliding the HOLD switch to the 
opposite direction of the arrow 
(pages 14, 15)
.
• The lid is not firmly closed.
, Close the lid until it clicks. Then slide OPEN to open the lid.
• Moisture has condensed inside the player.
, Take the disc out and leave the player in a warm place for several 
hours until the moisture evaporates.
• The dry battery is weak (“LOW BATTERY” flashes or nothing 
appears).
, Replace the dry battery with a new one.
• The disc is damaged or does not contain proper recording or editing 
data.
, Reinsert the disc. If the error message still appears, replace it with 
another disc.
• There is a built-in malfunction in the system.
• While operating, the player received a mechanical shock, too much 
static, abnormal power voltage caused by lightning, etc.
, Restart the operation as follows.
1
Disconnect all the power sources and the dedicated USB cable.
2
Leave the player for about 30 seconds.
3
Connect the power source.
The display window 
is not normal.
• The player was disconnected from the power source.
, Let the player sit for a while, or disconnect the power source, 
reconnect it, and then press any of the operation buttons.
020REG.book  Page 44  Wednesday, March 31, 2004  5:41 PM