Sony R500PC User Manual

MZ-R500/R500PC

4-11. Key Check Mode

This set can check if the set function normally.

• Setting Method of Key Check Mode

1. Setting the test mode (see page 12).
2. Press the

[T.MARK]

keys activates the key check mode.

(At the last two digits, AD value of remote commander key
line is displayed in hexadecimal)

3. When each key on the set and on remote commander is pressed,

its name is displayed on the LCD. (The operated position is
displayed for 4 seconds after the slide switch is operated. If
any other key is pressed during this display, the remote com-
mander LCD switches to its name display)

Example1: When

key on the set is pressed:

4-10. Sound Skip Check Result Display Mode

This set can display the count of errors that occurred during the
recording/playing for checking.

• Setting method of sound skip check result display

mode

1. Set the test mode (see page 12).
2. Press the

key or

[T.MARK]

[PLAY]

keys, and the play-

ing or recording sound skip result display mode becomes
active respectively where the LCD displays the following.

3. When the

key is pressed, total error count is displayed on

the LCD, and each time the

key is pressed, the display

item moves down by one as shown below. Also, if the

key

is pressed, the display item moves up by one, then if the

[T.MARK]

keys is pressed, the display in the record

mode appears.
When the

[T.MARK]

keys is pressed, total error count

is displayed on the LCD, and each time the

key is pressed,

the display item moves down by one as shown below. Also, if
the

key is pressed, the display item moves up by one,

then if the

key is pressed, the display in the play mode

appears.

Total count record
system errors(hex.)

Total count of play
system errors(hex.)

This set LCD display

P R

• Cause of Sound Skip Error

Cause of error

Description of error

EIB

Sound error correction error

Play

Stat

Decoder status error

Adrs

Address access error

BEmp

Buffer is empty

BOvr

Buffer is full, and sounds were
dumped

Record

Bful

Buffer capacity becomes less,
and forcible writing occurred

Rtry

Retry times over

4. To quit the sound skip check result display mode and to return

to the test mode (display check mode), press the

key.

0 00 P R

P R

0 00 EIB

0 00 Stat

0 00 Adrs

0 00 BEmp

0 00 ######

######

0 00 P R

0 00 BOvr

0 00 Bful

0 00 Rtry

0 00 ######

Playing sound skip
result display

Recording sound skip
result display

:Total play/record errors(hex.)
:Counter of sound skip check each item(hex.)
:6-digit address where sound was skipped last(hex.)

This set LCD display

8 8 8

RMC OK

This set LCD display

8 8 8