Nilfisk-Advance America RS 501 User Manual

33015500(3)2008-02

Maximum drive system pressure

250 Bar

Maximum accessory system pressure

120/200 Bar

Hydraulic system oil type (at ambient temperature above 10°C)

AGIP Arnica 46 (****)

NOTE
If the machine is to be used at ambient temperatures below 10°C, the oil should be replaced with equivalent oil having a 
viscosity of 32 cSt. For temperatures below 0°C, use oil with lower viscosity.

(****) 

See the below hydraulic system oil technical data and reference data tables.

AGIP ARNICA

46

32

ISO-L-HV

Viscosity at 40°C

mm

2

/s

45

32

ISO 11158

Viscosity at 100°C

mm

2

/s

7.97

6.40

AFNOR NF E 48603 HV

Viscosity index

/

150

157

AISE 127

Flash point COC

°C

215

202

ATOS Tab. P 002-0/I

Pour point

°C

-36

-36

BS 4231 HSE

Density at 15°C

kg/l

0.87

0.865

CETOP RP 91 H HV

COMMERCIAL HYDRAULICS

Danieli Standard 0.000.001 (AGIP ARNICA 
22, 46, 68)

EATON VICKERS I-286-S3

EATON VICKERS M-2950

DIN 51524 t.3 HVLP

LAMB LANDIS-CINCINNATI P68, P69 and 
P70

LINDE

PARKER HANNIFIN (DENISON) HF-0

REXROTH RE 90220-1/11.02

SAUER-DANFOSS 520L0463

In the environment where the machine operates, there must not be any danger of explosion.
To avoid inhaling exhaust gas, the machine must be used only where there is a proper air change.
The machine operates correctly (*) in the following environmental conditions:

Temperature: -10°C to +40°C
Humidity: 30% to 95%, not condensed

Store the machine indoor, in a clean and dry place, protected from bad weather conditions and with the following values:

Temperature: +1°C to +50°C
Humidity: maximum 95%, not condensed

(*)  When using the sweeper at a temperature between -10°C and 0°C the dust control system cannot be used; moreover the 

water tanks and the dust control system itself must be empty.

–
–

–
–